Specifications

5-20
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
Chapter 5 Configuring Features, Templates, Services, and Users
Configuring Corporate and Personal Directories
Configuring Corporate and Personal Directories
The Directories button on the Cisco Unified IP Phone 7962G and 7942G gives users access to several
directories. These directories can include:
Ta b l e 5-2 Configuration parameters for Cisco Unified IP Phones
Configuration Window Path Parameters
Enterprise Phone
Configuration window
System > Enterprise Phone
Configuration
You can set the following parameters
in any of the three configuration
windows:
• Settings Access
• Video Capabilities
• Web Access
• Load Server
• RTCP
• Peer Firmware Sharing
• Cisco Discovery Protocol (CDP):
Switch Port
• Cisco Discovery Protocol (CDP):
PC Port
• Link Layer Discovery Protocol -
Media Endpoint Discover
(LLDP-MED): Switch Port
• Link Layer Discovery Protocol
(LLDP): PC Port
• IPv6 Load Server
• 802.1x Authentication
Note When you set the parameters,
select the Override Common
Settings checkbox for each
setting you wish to update. If
you do not check this box, the
corresponding parameter
setting does not take effect. If
you set the parameters at the
three configuration windows,
the setting takes precedence in
the following order:
• Phone Configuration window
• Common Phone Profile window
• Enterprise Phone Configuration
window
Common Phone Profile
window
Device > Device Settings >
Common Phone Profile
Phone Configuration
window
Device > Phone; Product
Specific Configuration portion
of window