Specifications

5-8
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
CTI Applications A computer telephony integration (CTI) route
point can designate a virtual device to receive
multiple, simultaneous calls for
application-controlled redirection.
For more information, refer to Cisco Unified
Communications Manager Administration
Guide,
CTI Route Point Configuration.
Directed Call Park Allows a user to transfer an active call to an
available directed call park number that the user
dials or speed dials.
A Call Park BLF button indicates whether a
directed call park number is occupied and provides
speed-dial access to the directed call park number.
Note If you implement Directed Call Park, avoid
configuring the Park softkey. This prevents
users from confusing the two Call Park
features.
For more information refer to Cisco Unified
Communications Manager Features and
Services Guide,
Call Park and Directed Call
Park.
Directed Call Pickup Allows a user to answer a call that is ringing on a
particular directory number.
For more information, refer to Cisco Unified
Communications Manager Features and
Services Guide,
Call Pickup.
Direct transfer Allows users to connect two calls to each other
(without remaining on the line).
For more information, refer to Cisco Unified
Communications Manager System Guide,
Cisco Unified IP Phones.
Distinctive ring Users can customize how their phone indicates an
incoming call and a new voice mail message. Users
can customize up to six distinctive rings.
For more information, refer to Cisco Unified
Communications Manager Features and
Services Guide,
Custom Phone Rings.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference