Specifications

4-31
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
GARP Enabled Indicates whether the phone learns MAC
addresses from Gratuitous Address Resolution
Protocol (ARP) responses. Disabling the phone’s
ability to accept Gratuitous ARP will prevent
applications that use this mechanism to monitor
and record voice streams from working. If voice
monitoring is not desired, set this option to No
(disabled).
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
Vo i c e V L AN
Enabled
Indicates whether the phone allows a device
attached to the access port to access the Voice
VLAN. Setting this option to No (disabled)
prevents the attached PC from sending and
receiving data on the Voice VLAN. This setting
also prevents the PC from receiving data sent and
received by the phone. Set this setting to Yes
(enabled) if an application that requires
monitoring of the phone’s traffic is running on the
PC. These applications include monitoring and
recording applications and network monitoring
software.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
Web Access
Enabled
Indicates whether web access is enabled (Yes) or
disabled (No) for the phone.
For more information, see Disabling and Enabling
Web Page Access, page 8-3.
Security Mode Displays the security mode that is set for the
phone.
Use Cisco Unified Communications Manager
Administration to modify.
Logging Display For use by the Cisco Technical Assistance Center (TAC), if necessary.
Table 4-17 Security Configuration Menu Options (continued)
Option Description To Change