Administration Manual

4-9
Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0
OL-11560-01 Rev. B0
Chapter 4 Configuring Settings on the Conference Station
Device Configuration Menu
Note You update the settings in the Device Configuration menu from Cisco Unified Communications
Manager, not from the conference station.
For instructions about how to access the Device Configuration menu and its sub-menus, see the
“Displaying a Configuration Menu” section on page 4-2.
CallManager Configuration Menu
The CallManager Configuration menu contains the options CallManager 1, CallManager 2,
CallManager 3, CallManager 4, and CallManager 5. These options show the servers that are available
fo
r processing calls from the conference station, in prioritized order.
To change these options, use Cisco Unified Communications Manager Administration.
For an available server, an option on the CallManager Configuration menu will show the server
IP address or name and one of the states shown in Table 4-4.
An option may also display one or more of the designations shown in Ta
ble 4-5.
Ta b l e 4-4 Cisco Unified Communications Manager Server States
State Description
Active Cisco Unified Communications Manager server from which the
c
onference station is currently receivi
ng call-processing services
Standby Cisco Unified Communications Manager server to which the
c
onference station switches if the current server becomes unavailable
Blank No current connection to this Cisco Unified Communications Manager
se
rver
Ta b l e 4-5 Cisco Unified Communications Manager Server Designations
Designation Description
SRST Indicates a Survivable Remote Site Telephony router capable of providing
C
isco Unified Communications Manager functionality with a limited
feat
ure set. This router assumes control of call processing if all other
Cisco Unified Communications Manager servers become unreachable. The
SRST Cisco Unif
ied Communications Manager always appears last in the
list
of servers, even if it is active.
You configure an SRST router address in the
Ci
sco Unified Communications Manager Administration SRST Reference
Co
nfiguration page (choose System > SRST). You configure an SRST
reference in the Device Pool Configuration page (choose System >
Device
Pool).
TFTP Indicates that the conference station w
as unable to register with a
Cisco Unified Communications Manager listed in its configuration file and
that it re
gistered with the TFTP server instead.