Administration Manual

2-9
Cisco Unified IP Conference Station 7937 Administration Guide for Cisco Unified Communications Manager 6.0
OL-11560-01 Rev. B0
Chapter 2 Preparing to Install the Conference Station on Your Network
Determining the MAC Address of a Conference Station
Adding Conference Stations with Cisco Unified Communications Manager
Administration
You can add conference stations individually to the Cisco Unified Communications Manager database
using Cisco Unified Communications Manager Administration. To do so, you first need to obtain the
MA
C address for each conference station.
For information about determining a MAC address, see the “D
etermining the MAC Address of a
Conference Station” section on page 2-9.
After you collect MAC addresses, in Cisco Unified Communications Manager Administration, choose
De
vice > Phone, and then click Add New to begin.
For complete instructions and conceptual information about Cisco Unified Communications Manager,
refer t
o Cisco Unified Communications Manager Administration Guide and to Cisco Unif
ied
Communications Manager System Guide.
Related Topics
• Adding Conference Stations with Auto-Registration, page 2-7
• Adding Conference Stations with Auto-Registration and TAPS, page 2-8
• Adding Conference Stations with BAT, page 2-9
Adding Conference Stations with BAT
The Cisco BAT enables you to perform batch operations, including registration, on multiple
conference stations.
Before you can add conference stations using BAT only (not in conjunction with TAPS), you must obtain
the M
AC address for each conference station.
For information about determining a MAC address, see the “D
etermining the MAC Address of a
Conference Station” section on page 2-9.
For detailed instructions about using BAT, refer to Ci
sco Unified Communications Manager
Administration Guide and to Cisco Unified Communications Manager Bulk Administration Guide.
Related Topics
• Adding Conference Stations with Auto-Registration, page 2-7
• Adding Conference Stations with Auto-Registration and TAPS, page 2-8
• Adding Conference Stations with Cisco Unified Communications Manager Administration,
page 2-9
Determining the MAC Address of a Conference Station
You can determine the MAC address for a conference station in any of these ways:
• From the conference station, choose Applications > Settings > Model Information and look at the
MAC Address field.
• Look at the MAC label on the back of the conference station.
• Display the conference station web page, and click the Device Information hyperlink.
For information about accessing the confere
nce station web page, see the “Accessing the Web Page
for a Conference Station” section on page 8-2.