Specifications

Setting Up Call Handling
How to Set Up Call Handling for Incoming and Outgoing Calls
78
Cisco Unified Survivable Remote Site Telephony Version 4.0 System Administrator Guide
Use this command to test your translation profiles. See the test voice translation-rule command in the
Cisco IOS Voice Command Reference, Release 12.3 T for more information.
Router(config)# voice translation-rule 5
Router(cfg-translation-rule)# rule 1 /201/ /102/
Router(cfg-translation-rule)# end
Router# test voice translation-rule 5 2015550101
Matched with rule 5
Original number:2015550101 Translated number:1025550101
Original number type: none Translated number type: none
Original number plan: none Translated number plan: none
Configuring Dial-Peer and Channel Hunting
Dial-peer hunting, the search through a group of dial peers for an available phone line, is disabled during
Cisco Unified CallManager fallback by default. To enable dial-peer hunting, use the no huntstop
command. For more information about dial-peer hunting, see the “Configuring Dial Peer
Hunting” section in the Cisco IOS Voice, Video, and Fax Configuration Guide, Release 12.2.
If you have a dual-line phone configuration (see the “Configuring Dual-Line Phones” section on
page 58), you may want to keep incoming calls from hunting to the second channel if the first channel
is busy or does not answer by using the channel keyword in the huntstop command. As show in
Figure 3, this keeps the second channel free for call transfer, call waiting, or three-way conferencing.
Figure 3 Hunt Pattern for Dual-Line Configurations With and Without Huntstop
Channel huntstop also prevents situations in which a call can ring for 30 seconds on the first channel of
a line with no person available to answer and then ring for another 30 seconds on the second channel
before rolling over to another line.
SUMMARY STEPS
1. call-manager-fallback
2. huntstop [channel]
3. exit
155583
Ephone-dn 10 dual-line
Channel 1
Without
huntstop
channel
With
huntstop
channel
Channel 2
Ephone-dn 11 dual-line
Channel 1
Channel 2