Specifications

Setting Up Call Handling
How to Set Up Call Handling for Incoming and Outgoing Calls
76
Cisco Unified Survivable Remote Site Telephony Version 4.0 System Administrator Guide
DETAILED STEPS
Command or Action Purpose
Step 1
voice translation-rule number
Example:
Router(config)# voice translation-rule 1
Defines a translation rule for voice calls and enters voice
translation-rule configuration mode.
• number—Number that identifies the translation rule.
Range is from 1 to 2147483647.
Step 2
rule precedence / match-pattern /
/ replace-pattern /
Example:
Router(cfg-translation-rule)# rule 1/^9/ //
Defines a translation rule.
• precedence—Priority of the translation rule. Range is
from 1 to 15.
• match-pattern—Stream editor (SED) expression used
to match incoming call information. The slash (/) is a
delimiter in the pattern.
• replace-pattern—SED expression used to replace the
match pattern in the call information. The slash (/) is a
delimiter in the pattern.
Step 3
exit
Example:
Router(cfg-translation-rule)# exit
Exits voice translation-rule configuration mode.
Step 4
voice translation-profile name
Example:
Router(config)# voice translation-profile name1
Defines a translation profile for voice calls.
• name—Name of the translation profile. Maximum
length of the voice translation profile name is 31
alphanumeric characters.
Step 5
translate {called | calling | redirect-called}
translation-rule-number
Example:
Router(cfg-translation-profile)# translate
called 1
Associates a voice translation rule with a voice translation
profile.
• called—Associates the translation rule with called
numbers.
• calling—Associates the translation rule with calling
numbers.
• redirect-called—Associates the translation rule with
redirected called numbers.
• translation-rule-number—The reference number of
the translation rule from 1 to 2147483647.
Step 6
exit
Example:
Router(cfg-translation-profile)# exit
Exits translation-profile configuration mode.
Step 7
call-manager-fallback
Example:
Router(config)# call-manager-fallback
Enters call-manager-fallback configuration mode.