Specifications

63
Cisco Unified Survivable Remote Site Telephony Version 4.0 System Administrator Guide
Setting Up Call Handling
This chapter describes how to configure Cisco Unified Survivable Remote Site Telephony (SRST) for
incoming calls and outgoing calls.
Note Prior to version 4.0, the name of this product was Cisco SRST.
Note The Cisco IOS Voice Configuration Library includes a standard library preface, glossary, and feature and
troubleshooting documents and is located at
http://www.cisco.com/en/US/products/ps6441/prod_configuration_guide09186a0080565f8a.html.
Contents
• Information About Setting Up Call Handling, page 63
• How to Set Up Call Handling for Incoming and Outgoing Calls, page 63
• H.323 VoIP Call Preservation Enhancements for WAN Link Failures, page 97
• Where to Go Next, page 97
Information About Setting Up Call Handling
Cisco Unified SRST offers a smaller set of call handling capabilities than Cisco Unified CallManager,
and much of the configuration for these feature involves enabling existing Cisco Unified CallManager
or IP phone settings.
How to Set Up Call Handling for Incoming and Outgoing Calls
Setting up call handling involves the following set of tasks:
• Configuring Incoming Calls, page 64
• Configuring Outgoing Calls, page 81