Specifications

Setting Up Cisco Unified IP Phones
How to Set Up Cisco Unified IP Phones
56
Cisco Unified Survivable Remote Site Telephony Version 4.0 System Administrator Guide
DETAILED STEPS
Command or Action Purpose
Step 1
call-manager-fallback
Example:
Router(config)# call-manager-fallback
Enters call-manager-fallback configuration mode.
Step 2
system message {primary primary-string |
secondary
secondary-string }
Example:
Router(config-cm-fallback)# system message
primary Custom Message
Declares the text for the system display message on IP
phones in fallback mode.
• primary primary-string—For Cisco Unified IP Phones
that can support static text messages during fallback,
such as the Cisco Unified IP Phone 7940 and Cisco
Unified IP Phone 7960 units. A string of approximately
27 to 30 characters is allowed.
• secondary secondary-string—For Cisco Unified IP
Phones that do not support static text messages, such as
the Cisco Unified IP Phone 7910. A string of
approximately 20 characters is allowed.
Step 3
exit
Example:
Router(config-cm-fallback)# exit
Exits call-manager-fallback configuration mode.