Specifications

Setting Up Cisco Unified IP Phones
How to Set Up Cisco Unified IP Phones
55
Cisco Unified Survivable Remote Site Telephony Version 4.0 System Administrator Guide
Examples
The following example offers a configuration for the Portugal user locale.
call-manager-fallback
user-locale PT
Configuring Customized System Messages for Cisco Unified IP Phones
The system message command is used to customize the system message displayed on all
Cisco UnifiedIP Phone 7910, Cisco Unified IP Phone 7940G, and Cisco Unified IP Phone 7960G units
during Cisco Unified CallManager fallback.
One of two keywords, primary and secondary, must be included in the command. The primary
keyword is for IP phones that can support static text messages during fallback, such as the Cisco IP
Phone 7940 and Cisco IP Phone 7960 units. The default display message for primary IP phones in
fallback mode is “CM Fallback Service Operating.”
The secondary keyword is for Cisco Unified IP Phones that do not support static text messages and have
a limited display space, such as the Cisco IP Phone 7910. Secondary IP phones flash messages during
fallback. The default display message for secondary IP phones in fallback mode is “CM Fallback
Service.”
Changes to the display message will occur immediately after configuration or at the end of each call.
Note The normal in-service static text message is controlled by Cisco Unified CallManager.
SUMMARY STEPS
1. call-manager-fallback
2. system message {primary primary-string | secondary secondary-string}
3. exit