Specifications

Cisco Unified Survivable Remote Site Telephony Feature Roadmap

Feature Roadmap

Cisco Unified Survivable Remote Site Telephony Version 4.0 System Administrator Guide

• Enhancement to the cor Command

• Enhancement to the pickup Command

• Enhancement to the user-locale Command

• Increased the Number of Cisco Unified IP Phones Supported on the Cisco 3845

• MOH Live-Feed Support

• No Timeout for Call Preservation

• RFC 2833 DTMF Relay Support

• Translation Profile Support

Enhancement to the alias Command

The alias command has been enhanced as follows:

• The cfw keyword was added, providing call forward no-answer/busy capabilities.

• The maximum number of alias commands used for creating calls to telephone numbers that are

unavailable during Cisco Unified CallManager fallback was increased to 50.

• The alternate-number argument can be used in multiple alias commands.

For more information, see the alias command in the Cisco Unified Survivable Remote Site Telephony

(SRST) Command Reference (All Versions).

Enhancement to the cor Command

The maximum number of cor lists has been increased to 20.

For more information, see the cor command in the Cisco Unified Survivable Remote Site Telephony

(SRST) Command Reference (All Versions).

Enhancement to the pickup Command

The pickup command has been introduced to enable the PickUp soft key on all Cisco Unified IP Phones,

allowing an external Direct Inward Dialing (DID) call coming into one extension to be picked up from

another extension during SRST.

For more information, see the pickup command in the Cisco Unified Survivable Remote Site Telephony

(SRST) Command Reference (All Versions).

Enhancement to the user-locale Command

Theuser-locale command has been enhanced to display the Japanese Katakana country code. Japanese

Katakana is available under Cisco Unified CallManager V4.0 or later.

For more information, see the user-locale command in the Cisco Unified Survivable Remote Site

Telephony (SRST) Command Reference (All Versions).