Specifications

Setting Video Parameters
How to Set Video Parameters for Cisco Unified SRST
170
Cisco Unified Survivable Remote Site Telephony Version 4.0 System Administrator Guide
DETAILED STEPS
Verifying Cisco Unified SRST
Use the following procedure to verify that the Cisco Unified SRST feature is enabled, and to verify
Cisco Unified IP phone configuration settings.
SUMMARY STEPS
1. enable
2. show running config
3. show call-manager-fallback all
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
voice service voip
Example:
Router(config)# voice service voip
Enters voice-service configuration mode.
Step 4
h323
Example:
Router(config-voi-serv)# h323
Enters H.323 voice-service configuration mode.
Step 5
call start slow
Example:
Router(config-serv-h323)# call start slow
Forces an H.323 gateway to use slow-connect procedures
for all VoIP calls.