Specifications

Integrating Voice Mail with Cisco Unified SRST
Configuration Examples
161
Cisco Unified Survivable Remote Site Telephony Version 4.0 System Administrator Guide
Configuration Examples
This section provides the following configuration examples:
• Configuring Local Voice-Mail System (FXO and FXS): Example, page 161
• Configuring Central Location Voice-Mail System (FXO and FXS): Example, page 162
• Configuring Voice-Mail Access over FXO and FXS: Example, page 162
• Configuring Voice-Mail Access over BRI and PRI: Example, page 163
Configuring Local Voice-Mail System (FXO and FXS): Example
The “Dial-Peer Configuration for Integration of Voice-Mail with Cisco Unified SRST” section of the
example below shows a legacy dial-peer configuration for a local voice-mail system. The “Cisco Unified
SRST Voice-Mail Integration Pattern Configuration” section must be compatible with your voice-mail
system configuration.
! Dial-Peer Configuration for Integration of Voice-Mail with Cisco Unified SRST
!
dial-peer voice 101 pots
destination-pattern 14011
port 3/0/0
!
dial-peer voice 102 pots
preference 1
destination-pattern 14011
port 3/0/1
!
dial-peer voice 103 pots
preference 2
destination-pattern 14011
port 3/1/0
!
dial-peer voice 104 pots
destination-pattern 14011
port 3/1/1
!
! Cisco Unified SRST configuration
!
call-manager-fallback
max-ephones 24
max-dn 144
ip source-address 1.4.214.104 port 2000
voicemail 14011
call-forward busy 14011
call-forward noan 14011 timeout 3
! Cisco Unified SRST Voice-Mail Integration Pattern Configuration
!
vm-integration
pattern direct 2 CGN *
pattern ext-to-ext no-answer 5 FDN * CGN *
pattern ext-to-ext busy 7 FDN * CGN *
pattern trunk-to-ext no-answer 4 FDN * CGN *
pattern trunk-to-ext busy 6 FDN * CGN *