Specifications

Configuring Additional Call Features
How to Configure Additional Call Features
102
Cisco Unified Survivable Remote Site Telephony Version 4.0 System Administrator Guide
Example
The following example enables the playing of an audio file called classical.au on G.711, on-net VoIP,
and PSTN calls:
call-manager-fallback
moh classical.au
Configuring MOH from Flash Files
The MOH Multicast from Flash Files feature facilitates the continuous multicast of MOH audio feed
from files in the flash memories of Cisco Unified SRST branch office routers during Cisco Unified
CallManager fallback and normal Cisco Unified CallManager service. Multicasting MOH from
individual branch routers saves WAN bandwidth by eliminating the need to stream MOH audio from
central offices to remote branches.
Configuration for this feature involves configuring Cisco Unified SRST and Cisco Unified CallManager
to work together, which is described in Integrating Cisco CallManager and Cisco SRST to Use
Cisco SRST As a Multicast MOH Resource at
http://www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/srs/srsinter/moh.htm.
The MOH Multicast from Flash Files feature can act as a backup mechanism to the MOH live feed
feature. MOH live feed provides live feed MOH streams from an audio device connected to an E&M or
FXO port to Cisco IP phones in SRST mode. Music from a live feed is from a fixed source and is
continuously fed into the MOH playout buffer instead of being read from a flash file. See the Configuring
SRST MOH Live-Feed Support section at
http://www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/srs/srsinter/moh.htm.
Defining XML API Schema
The Cisco IOS commands in this section allow you to specify parameters associated with the XML API.
For more information, refer to the XML Developer Guide for Cisco CME/SRST.
SUMMARY STEPS
1. call-manager-fallback
2. xmlschema schema-url
3. exit