Quick Start Guide

View/Dial the
Corporate Directory
1
2
3
4 Use the Up/Down Arrow key as needed to select the desired listing.
5
Press the
Dial
soft key.
▪
Getting Help
1
2
the Help. Select it.
▪
Tip: Any questions that you can not figure out on your own, call your IT Deptarment.
Handset, Speaker or
Headset Volume
1
2
▪
Ringer Volume
1
Press the Volume button ("+" and "-" signs on it) while
phone is on hook
.
2 Press the "+" Volume side of the button to increase and "-" to decrease it.
3 The ring volume will be saved automatically.
Ringer Selection
1
2
Use the Up/Down Arrow key to select the default ring and press
Select
.
3
Scroll through the list of ring options, press the
Play
soft key to "audition" the ring tone.
4
When you are satisfied with you choice, press the
Select
soft key.
Press the Settings button (the check marked box) and use the Up/Down Arrow key to select
Ring Type, then press the Select soft key.
Press 5 on the keypad or use the down arrow of the Navigation button and scroll to the
To increase or decrease the volume of your handset, lift the handset and press the up or
down volume button (has the "+" and "-" signs on it). To adjust the volume for headset or
speaker, just select the one you want to set volume for and adjust using the volume key as
above.
To save the setting, press the Save soft key; otherwise, it will revert to old volume setting
once you hang up.
Note: Volume setting should be saved near the middle, and increased as needed for a call. Contact your
administrator if you find that you need to raise the volume on a regular basis.
Note: It is not necessary to enter a complete name or number to search for, and entries that start with the
data you enter will match the search criteria.
Press Menu/Application button (Line at top on left) and look at the status window.
Audio and Comfort Features:
Use the Up/Down Arrow key select First Name, Last Name or Number you'd like to search
for.
Use the keypad to enter the name or number you want to search for (using "cell-phone" like
numbers for spelling, for example to get the letter "C" press the "2" button three times).
Press the Directories button, and use the Up/Down Arrows Navigation key to select
Corporate Directory, then press the Select soft key.
©2007 INX, all rights reserved
4
Quick Guide 1/2008