Specifications
Table Of Contents
- Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0 and Later
- Contents
- Preface
- An Overview of the Cisco Unified Wireless IP Phone 7921G
- An Overview of the Voice Over IP Wireless Network
- Understanding the Wireless LAN
- Components of the VoIP Wireless Network
- Voice Over IP Wireless Network Configuration
- Site Survey Verification
- Setting Up the Cisco Unified Wireless IP Phone 7921G
- Before You Begin
- Installing the Cisco Unified Wireless IP Phone 7921G
- Powering On the Cisco Unified Wireless IP Phone 7921G
- Understanding the Phone Startup Process
- Using the Cisco Unified Wireless IP Phone 7921G Web Pages
- Using the USB Connection for Initial Phone Configuration
- Updating Phones Remotely
- Configuring Network Profiles
- Configuring USB Settings
- Configuring Trace Settings
- Using System Settings
- Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
- Accessing Network and Phone Settings
- Configuring Network Profile Settings
- Changing Phone Settings
- Configuring the Security Certificate on the Phone
- Changing the USB Configuration
- Configuring Features, Templates, Services, and Users
- Configuring Cisco Unified Wireless IP Phones in Cisco Unified CallManager
- Telephony Features Available for the Phone
- Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G
- Configuring Softkey Templates
- Modifying Phone Button Templates
- Setting Up Services
- Configuring Corporate and Personal Directories
- Adding Users to Cisco Unified CallManager
- Managing the User Options Web Pages
- Creating Custom Phone Rings
- Viewing Security, Device, Model, and Status Information on the Phone
- Monitoring the Cisco Unified Wireless IP Phone Remotely
- Troubleshooting the Cisco Unified Wireless IP Phone 7921G
- Resolving Startup and Connectivity Problems
- Resolving Voice Quality and Roaming Problems
- General Troubleshooting Information
- Erasing the Local Configuration
- Providing Information to Users By Using a Website
- Supporting International Users
- Physical and Operating Environment Specifications
- Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
- Index
3-7
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
Chapter 3 Setting Up the Cisco Unified Wireless IP Phone 7921G
Before You Begin
Warning
This warning symbol means danger. You are in a situation that could cause
bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for
preventing accidents. Use the statement number provided at the end of each
warning to locate its translation in the translated safety warnings that
accompanied this device.
Statement 1071
Warning
Read the installation instructions before connecting the system to the power
source.
Statement 1004
Warning
This equipment will not be able to access emergency services during a power
outage because of reliance on utility power for normal operation. Alternative
arrangements should be made for access to emergency services. Access to
emergency services can be affected by any call-barring function of this
equipment.
Warning
Do not use the Cisco Unified Wireless IP Phone 7921G in hazardous
environments such as areas where high levels of explosive gas may be present.
Check with the site safety engineer before using any type of wireless device in
such an environment.
Warning
The plug-socket combination for the battery charger must be accessible at all
times, because it serves as the main disconnecting device.
Statement 1019
Warning
The battery charger requires short-circuit (overcurrent) protection to be
provided as part of the building installation. Install only in accordance with
national and local wiring regulations.
Statement 1045
Warning
The power supply must be placed indoors.
Statement 331