Specifications

Chapter 1 An Overview of the Cisco Unified Wireless IP Phone 7921G
Overview of Configuring and Installing the Cisco Unified Wireless IP Phone 7921G
1-20
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
5. Add and configure directory
numbers (lines) on the phone by
completing these required fields in
the Directory Number Configuration
window.
• Directory number(s)
• Partition
• Directory number settings:
Voice Mail (if used)
Presence Group*
• Call Forwarding and Pickup (if
used)
• Line Settings
• Multiple Calls and Call Waiting
Adds primary and secondary
directory numbers and
features associated with
directory numbers to the
phone.
*This field is required in Cisco
Unified CallManager 5.0 and
later.
Refer to the Cisco Unified
CallManager 4.x
Administration Guide, “Cisco
Unified IP Phone
Configuration” chapter:
“Adding a Directory Number”
section
“Creating a Cisco Unity Voice
Mailbox” section.
Refer to the Cisco Unified
CallManager 5.x
Administration Guide,
“Configuring Directory
Numbers” chapter:
See the “Telephony Features
Available for the Phone”
section on page 6-2.
6. Configure speed-dial numbers
(optional).
Adds speed-dial numbers.
Note Users can change
speed-dial settings on
their phones by using
Cisco Unified
IP
Phone User
Options.
Refer to the Cisco Unified
CallManager Administration
Guide, Cisco
Unified
IP Phone
Configuration chapter,
“Configuring Speed-Dial
Buttons” section.
7. Configure Cisco Unified IP Phone
services and assign services
(optional).
Provides IP Phone services.
Note Users can add or
change services on
their phones by using
the Cisco Unified
IP
Phone User
Options.
Refer to the Cisco Unified
CallManager Administration
Guide, Cisco
Unified
IP Phone Services
Configuration chapter.
See the “Setting Up Services”
section on page 6-19.
Table 1-3 Checklist for Configuring the Cisco Unified Wireless IP Phone 7921G in Cisco
Unified CallManager (continued)
Task Purpose For More Information