Specifications
Table Of Contents
- Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0 and Later
- Contents
- Preface
- An Overview of the Cisco Unified Wireless IP Phone 7921G
- An Overview of the Voice Over IP Wireless Network
- Understanding the Wireless LAN
- Components of the VoIP Wireless Network
- Voice Over IP Wireless Network Configuration
- Site Survey Verification
- Setting Up the Cisco Unified Wireless IP Phone 7921G
- Before You Begin
- Installing the Cisco Unified Wireless IP Phone 7921G
- Powering On the Cisco Unified Wireless IP Phone 7921G
- Understanding the Phone Startup Process
- Using the Cisco Unified Wireless IP Phone 7921G Web Pages
- Using the USB Connection for Initial Phone Configuration
- Updating Phones Remotely
- Configuring Network Profiles
- Configuring USB Settings
- Configuring Trace Settings
- Using System Settings
- Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
- Accessing Network and Phone Settings
- Configuring Network Profile Settings
- Changing Phone Settings
- Configuring the Security Certificate on the Phone
- Changing the USB Configuration
- Configuring Features, Templates, Services, and Users
- Configuring Cisco Unified Wireless IP Phones in Cisco Unified CallManager
- Telephony Features Available for the Phone
- Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G
- Configuring Softkey Templates
- Modifying Phone Button Templates
- Setting Up Services
- Configuring Corporate and Personal Directories
- Adding Users to Cisco Unified CallManager
- Managing the User Options Web Pages
- Creating Custom Phone Rings
- Viewing Security, Device, Model, and Status Information on the Phone
- Monitoring the Cisco Unified Wireless IP Phone Remotely
- Troubleshooting the Cisco Unified Wireless IP Phone 7921G
- Resolving Startup and Connectivity Problems
- Resolving Voice Quality and Roaming Problems
- General Troubleshooting Information
- Erasing the Local Configuration
- Providing Information to Users By Using a Website
- Supporting International Users
- Physical and Operating Environment Specifications
- Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
- Index
D-3
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
Appendix D Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
Configuring the Wireless Network
Configuration Tip for Cisco Airespace Access Points
If you are using EAP-FAST with Cisco Airespace technology, you must increase
the EAP request (802.1x) timeout to at least 20 seconds to ensure that the phone
gets the PAC credentials successfully.
To change the request timeout on the controller, follow these steps:
Configure radio
(802.11) settings
Data Rate—Set for11 Mbps or to the
rate for the frequency band that you are
using.
Client Transmit Power—After a site
survey, determine the appropriate
power requirements and set a specific
Client Transmit Power setting. The
Cisco
Unified Wireless
IP
Phone 7921G uses the same setting
as the access point.
Note If set for Max, the access point
does not advertise Client
Transmit Power setting.
Cisco IOS Software Configuration
Guide for Cisco Aironet Access
Points, Cisco IOS Release
12.3(8)JA
Deployment Guidelines for the
Cisco Unified Wireless IP Phone
7921G
Configure Security for
the voice VLANs
Use one of these authentication and
encryption options for the SSID that
corresponds to the voice VLAN:
• Open
• Shared Key
• EAP
• Auto (AKM)
Choosing Authentication and
Encryption Methods, page 2-21
Cisco IOS Software Configuration
Guide for Cisco Aironet Access
Points, Cisco IOS Release
12.3(8)JA
Table D-1 Wireless Network Configuration Tasks (continued)
Activity Explanation Reference