Specifications
Table Of Contents
- Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0 and Later
- Contents
- Preface
- An Overview of the Cisco Unified Wireless IP Phone 7921G
- An Overview of the Voice Over IP Wireless Network
- Understanding the Wireless LAN
- Components of the VoIP Wireless Network
- Voice Over IP Wireless Network Configuration
- Site Survey Verification
- Setting Up the Cisco Unified Wireless IP Phone 7921G
- Before You Begin
- Installing the Cisco Unified Wireless IP Phone 7921G
- Powering On the Cisco Unified Wireless IP Phone 7921G
- Understanding the Phone Startup Process
- Using the Cisco Unified Wireless IP Phone 7921G Web Pages
- Using the USB Connection for Initial Phone Configuration
- Updating Phones Remotely
- Configuring Network Profiles
- Configuring USB Settings
- Configuring Trace Settings
- Using System Settings
- Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
- Accessing Network and Phone Settings
- Configuring Network Profile Settings
- Changing Phone Settings
- Configuring the Security Certificate on the Phone
- Changing the USB Configuration
- Configuring Features, Templates, Services, and Users
- Configuring Cisco Unified Wireless IP Phones in Cisco Unified CallManager
- Telephony Features Available for the Phone
- Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G
- Configuring Softkey Templates
- Modifying Phone Button Templates
- Setting Up Services
- Configuring Corporate and Personal Directories
- Adding Users to Cisco Unified CallManager
- Managing the User Options Web Pages
- Creating Custom Phone Rings
- Viewing Security, Device, Model, and Status Information on the Phone
- Monitoring the Cisco Unified Wireless IP Phone Remotely
- Troubleshooting the Cisco Unified Wireless IP Phone 7921G
- Resolving Startup and Connectivity Problems
- Resolving Voice Quality and Roaming Problems
- General Troubleshooting Information
- Erasing the Local Configuration
- Providing Information to Users By Using a Website
- Supporting International Users
- Physical and Operating Environment Specifications
- Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
- Index
Appendix B Supporting International Users
B-2
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
Procedure
Step 1 Download the locale-specific version of the Cisco Unified CallManager Locale
Installer at this URL:
http://www.cisco.com/kobayashi/sw-center/telephony/callmgr/locale-installer.sh
tml.
Step 2 Install the locale-specific version of the Cisco Unified CallManager Locale
Installer on every Cisco
Unified CallManager server in the cluster.
• For Cisco Unified CallManager Release 4.1 and later, refer to Using the Cisco
Unified IP Telephony Locale Installer for Cisco Unified CallManager for
your Cisco Unified CallManager release.
• For Cisco Unified CallManager Releases 5.0 and later, refer to the “Locale
Installation” section in the Cisco IP Telephony Platform Administration
Guide.
Step 3 After modifying the user locale on the Cisco Unified Wireless IP Phone 7921G,
you must power cycle the phone.
Note When deploying Cisco Unified Wireless IP Phone 7921G for the first time, you
must install the 7921G Device Pack to add the new phone type to Cisco Unified
CallManager. Then you must reinstall the locale specific Cisco Unified
CallManager Locale Installer to update the user locale for the Cisco
Unified
Wireless IP Phone 7921G.
Note All languages may not be immediately available, so continue to check the website
for updates.