Specifications
Table Of Contents
- Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0 and Later
- Contents
- Preface
- An Overview of the Cisco Unified Wireless IP Phone 7921G
- An Overview of the Voice Over IP Wireless Network
- Understanding the Wireless LAN
- Components of the VoIP Wireless Network
- Voice Over IP Wireless Network Configuration
- Site Survey Verification
- Setting Up the Cisco Unified Wireless IP Phone 7921G
- Before You Begin
- Installing the Cisco Unified Wireless IP Phone 7921G
- Powering On the Cisco Unified Wireless IP Phone 7921G
- Understanding the Phone Startup Process
- Using the Cisco Unified Wireless IP Phone 7921G Web Pages
- Using the USB Connection for Initial Phone Configuration
- Updating Phones Remotely
- Configuring Network Profiles
- Configuring USB Settings
- Configuring Trace Settings
- Using System Settings
- Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
- Accessing Network and Phone Settings
- Configuring Network Profile Settings
- Changing Phone Settings
- Configuring the Security Certificate on the Phone
- Changing the USB Configuration
- Configuring Features, Templates, Services, and Users
- Configuring Cisco Unified Wireless IP Phones in Cisco Unified CallManager
- Telephony Features Available for the Phone
- Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G
- Configuring Softkey Templates
- Modifying Phone Button Templates
- Setting Up Services
- Configuring Corporate and Personal Directories
- Adding Users to Cisco Unified CallManager
- Managing the User Options Web Pages
- Creating Custom Phone Rings
- Viewing Security, Device, Model, and Status Information on the Phone
- Monitoring the Cisco Unified Wireless IP Phone Remotely
- Troubleshooting the Cisco Unified Wireless IP Phone 7921G
- Resolving Startup and Connectivity Problems
- Resolving Voice Quality and Roaming Problems
- General Troubleshooting Information
- Erasing the Local Configuration
- Providing Information to Users By Using a Website
- Supporting International Users
- Physical and Operating Environment Specifications
- Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
- Index
8-17
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
Chapter 8 Monitoring the Cisco Unified Wireless IP Phone Remotely
Stream Statistics
Sender Joins Number of times the phone has started transmitting
a stream
Receiver Joins Number of times the phone has started receiving a
stream
Byes Number of times the phone has stopped transmitting
a stream
Start Time Internal time stamp indicating when Cisco Unified
CallManager requested that the phone start
transmitting packets
Row Status Indicates whether the phone is streaming
Host Name Host name for the phone
Sender Packets Number of RTP voice packets transmitted since
voice stream was opened
Note This number is not necessarily identical to
the number of RTP voice packets transmitted
since the call began because the call might
have been placed on hold.
Sender Octets Total number of octets sent by the phone
Sender Tool Type of audio encoding used for the stream: G.729,
G.711 u-law, G.711 A-law, or Lin16k
Sender Reports Number of times this streaming statistics report has
been accessed from the web page (resets when the
phone resets)
Sender Report Time Internal time stamp indicating when this streaming
statistics report was generated
Sender Start Time Time that the stream started
Table 8-6 Stream Statistics Items (continued)
Item Description