Specifications
Table Of Contents
- Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0 and Later
- Contents
- Preface
- An Overview of the Cisco Unified Wireless IP Phone 7921G
- An Overview of the Voice Over IP Wireless Network
- Understanding the Wireless LAN
- Components of the VoIP Wireless Network
- Voice Over IP Wireless Network Configuration
- Site Survey Verification
- Setting Up the Cisco Unified Wireless IP Phone 7921G
- Before You Begin
- Installing the Cisco Unified Wireless IP Phone 7921G
- Powering On the Cisco Unified Wireless IP Phone 7921G
- Understanding the Phone Startup Process
- Using the Cisco Unified Wireless IP Phone 7921G Web Pages
- Using the USB Connection for Initial Phone Configuration
- Updating Phones Remotely
- Configuring Network Profiles
- Configuring USB Settings
- Configuring Trace Settings
- Using System Settings
- Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
- Accessing Network and Phone Settings
- Configuring Network Profile Settings
- Changing Phone Settings
- Configuring the Security Certificate on the Phone
- Changing the USB Configuration
- Configuring Features, Templates, Services, and Users
- Configuring Cisco Unified Wireless IP Phones in Cisco Unified CallManager
- Telephony Features Available for the Phone
- Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G
- Configuring Softkey Templates
- Modifying Phone Button Templates
- Setting Up Services
- Configuring Corporate and Personal Directories
- Adding Users to Cisco Unified CallManager
- Managing the User Options Web Pages
- Creating Custom Phone Rings
- Viewing Security, Device, Model, and Status Information on the Phone
- Monitoring the Cisco Unified Wireless IP Phone Remotely
- Troubleshooting the Cisco Unified Wireless IP Phone 7921G
- Resolving Startup and Connectivity Problems
- Resolving Voice Quality and Roaming Problems
- General Troubleshooting Information
- Erasing the Local Configuration
- Providing Information to Users By Using a Website
- Supporting International Users
- Physical and Operating Environment Specifications
- Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
- Index
8-11
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
Chapter 8 Monitoring the Cisco Unified Wireless IP Phone Remotely
Wireless LAN Statistics
Wireless LAN Statistics
The Wireless LAN Statistics area on a phone’s web page provides information
about wireless network traffic on the phone.
Table 8-4 describes the items in this
area.
To display a wireless LAN statistics area, access the web page for the phone as
described in the
“Accessing the Web Page for a Phone” section on page 8-2, and
then click the Wireless LAN hyperlink under Statistics.
WLAN Regulatory Domain Identifier for the wireless regulatory region in
which this phone must operate
USB Vendor/Product ID Unique code that identifies the phone as a Cisco
Systems product
USB RNDIS Device
Address
Manufacturer-assigned unique MAC address for
the USB Remote Network Driver Interface
Specification (RNDIS) for the phone
USB RNDIS Host Address Manufacturer-assigned unique MAC address for
the USB RNDIS for the host
Table 8-3 Device Information Area Items (continued)
Item Description
Ta b l e 8-4 Wireless LAN Statistics Items
Item Description
Rx Statistics
Rx OK Frames Number of packets received successfully
Rx Error Frames Number of packets received with errors
Rx Unicast Frames Number of packets received that are unicast traffic
Rx Multicast Frames Number of packets received that are multicast traffic
Rx Broadcast Frames Number of packets received that are broadcast traffic
Rx FCS Frames Number of packets received frames checksum error
Rx Beacons Number of received beacons