Specifications
Table Of Contents
- Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0 and Later
- Contents
- Preface
- An Overview of the Cisco Unified Wireless IP Phone 7921G
- An Overview of the Voice Over IP Wireless Network
- Understanding the Wireless LAN
- Components of the VoIP Wireless Network
- Voice Over IP Wireless Network Configuration
- Site Survey Verification
- Setting Up the Cisco Unified Wireless IP Phone 7921G
- Before You Begin
- Installing the Cisco Unified Wireless IP Phone 7921G
- Powering On the Cisco Unified Wireless IP Phone 7921G
- Understanding the Phone Startup Process
- Using the Cisco Unified Wireless IP Phone 7921G Web Pages
- Using the USB Connection for Initial Phone Configuration
- Updating Phones Remotely
- Configuring Network Profiles
- Configuring USB Settings
- Configuring Trace Settings
- Using System Settings
- Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
- Accessing Network and Phone Settings
- Configuring Network Profile Settings
- Changing Phone Settings
- Configuring the Security Certificate on the Phone
- Changing the USB Configuration
- Configuring Features, Templates, Services, and Users
- Configuring Cisco Unified Wireless IP Phones in Cisco Unified CallManager
- Telephony Features Available for the Phone
- Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G
- Configuring Softkey Templates
- Modifying Phone Button Templates
- Setting Up Services
- Configuring Corporate and Personal Directories
- Adding Users to Cisco Unified CallManager
- Managing the User Options Web Pages
- Creating Custom Phone Rings
- Viewing Security, Device, Model, and Status Information on the Phone
- Monitoring the Cisco Unified Wireless IP Phone Remotely
- Troubleshooting the Cisco Unified Wireless IP Phone 7921G
- Resolving Startup and Connectivity Problems
- Resolving Voice Quality and Roaming Problems
- General Troubleshooting Information
- Erasing the Local Configuration
- Providing Information to Users By Using a Website
- Supporting International Users
- Physical and Operating Environment Specifications
- Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
- Index
7-19
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
Chapter 7 Viewing Security, Device, Model, and Status Information on the Phone
Viewing the Phone Status Menu
A single call can have multiple voice streams, but data is captured for only the last
voice stream. A voice stream is a packet stream between two endpoints. If one
endpoint is put on hold, the voice stream stops even though the call is still
connected. When the call resumes, a new voice packet stream begins, and the new
call data overwrites the former call data.
To display the Call Statistics screen for information about the last voice stream,
follow these steps:
Procedure
Step 1 Press Settings > Status.
Step 2 Scroll to and select Call Statistics; the list of statistics appears.
Step 3 Use the Navigation button to scroll through the items in the Call Statistics screen.
Table 7-6 describes the items that appear in this screen.
Step 4 To exit the Call Statistics screen, press the Back softkey.
Ta b l e 7-6 Call Statistics Items
Item Description
Rcvr Codec Type of voice stream received (RTP streaming
audio): G.729, G.711 u-law, G.711 A-law, or
Lin16k.
Sender Codec Type of voice stream transmitted (RTP streaming
audio): G.729, G.711 u-law, G.711 A-law, or
Lin16k.
Rcvr Size Size of voice packets, in milliseconds, in the
receiving voice stream (RTP streaming audio).
Sender Size Size of voice packets, in milliseconds, in the
transmitting voice stream.