Specifications
Table Of Contents
- Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0 and Later
- Contents
- Preface
- An Overview of the Cisco Unified Wireless IP Phone 7921G
- An Overview of the Voice Over IP Wireless Network
- Understanding the Wireless LAN
- Components of the VoIP Wireless Network
- Voice Over IP Wireless Network Configuration
- Site Survey Verification
- Setting Up the Cisco Unified Wireless IP Phone 7921G
- Before You Begin
- Installing the Cisco Unified Wireless IP Phone 7921G
- Powering On the Cisco Unified Wireless IP Phone 7921G
- Understanding the Phone Startup Process
- Using the Cisco Unified Wireless IP Phone 7921G Web Pages
- Using the USB Connection for Initial Phone Configuration
- Updating Phones Remotely
- Configuring Network Profiles
- Configuring USB Settings
- Configuring Trace Settings
- Using System Settings
- Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
- Accessing Network and Phone Settings
- Configuring Network Profile Settings
- Changing Phone Settings
- Configuring the Security Certificate on the Phone
- Changing the USB Configuration
- Configuring Features, Templates, Services, and Users
- Configuring Cisco Unified Wireless IP Phones in Cisco Unified CallManager
- Telephony Features Available for the Phone
- Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G
- Configuring Softkey Templates
- Modifying Phone Button Templates
- Setting Up Services
- Configuring Corporate and Personal Directories
- Adding Users to Cisco Unified CallManager
- Managing the User Options Web Pages
- Creating Custom Phone Rings
- Viewing Security, Device, Model, and Status Information on the Phone
- Monitoring the Cisco Unified Wireless IP Phone Remotely
- Troubleshooting the Cisco Unified Wireless IP Phone 7921G
- Resolving Startup and Connectivity Problems
- Resolving Voice Quality and Roaming Problems
- General Troubleshooting Information
- Erasing the Local Configuration
- Providing Information to Users By Using a Website
- Supporting International Users
- Physical and Operating Environment Specifications
- Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
- Index
Chapter 6 Configuring Features, Templates, Services, and Users
Configuring Softkey Templates
6-16
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
• Special Numbers—Identifies special phone numbers that do not require
unlocking the keypad to call, such as 911 or an emergency number. Enter
numbers up to 16 digits in length.
• Push-to-talk URL—Specifies the URL that the phone contacts when pressing
the configurable Applications button for services such as Push to Talk or
directories.
To configure product specific options, follow these steps:
Procedure
Step 1 From Cisco Unified CallManager 4.x Administration, choose Device > Phone
Click Add a Phone, then choose Phone Type > Cisco 7921.
or
From Cisco Unified CallManager 5.x Administration, choose Device > Phone
Click Add Phone, then choose Phone Type > Cisco 7921.
Step 2 In the Phone Configuration page, locate the Product Specific Configuration
area.
Step 3 Make changes to the settings as needed.
Note For detailed information about these settings, click the I or ? button for
Product Specific Configuration Help.
Step 4 You must reset the phone before the changes take effect.
Configuring Softkey Templates
Administrators can change the order of softkeys for the Cisco Unified Wireless IP
Phone 7921G by using Cisco
Unified CallManager Administration. Unlike other
Cisco
Unified IP Phones that have buttons for some functions, the Cisco Unified
Wireless IP Phone 7921G has two non-configurable softkeys that are set for: