Specifications
Table Of Contents
- Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0 and Later
- Contents
- Preface
- An Overview of the Cisco Unified Wireless IP Phone 7921G
- An Overview of the Voice Over IP Wireless Network
- Understanding the Wireless LAN
- Components of the VoIP Wireless Network
- Voice Over IP Wireless Network Configuration
- Site Survey Verification
- Setting Up the Cisco Unified Wireless IP Phone 7921G
- Before You Begin
- Installing the Cisco Unified Wireless IP Phone 7921G
- Powering On the Cisco Unified Wireless IP Phone 7921G
- Understanding the Phone Startup Process
- Using the Cisco Unified Wireless IP Phone 7921G Web Pages
- Using the USB Connection for Initial Phone Configuration
- Updating Phones Remotely
- Configuring Network Profiles
- Configuring USB Settings
- Configuring Trace Settings
- Using System Settings
- Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
- Accessing Network and Phone Settings
- Configuring Network Profile Settings
- Changing Phone Settings
- Configuring the Security Certificate on the Phone
- Changing the USB Configuration
- Configuring Features, Templates, Services, and Users
- Configuring Cisco Unified Wireless IP Phones in Cisco Unified CallManager
- Telephony Features Available for the Phone
- Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G
- Configuring Softkey Templates
- Modifying Phone Button Templates
- Setting Up Services
- Configuring Corporate and Personal Directories
- Adding Users to Cisco Unified CallManager
- Managing the User Options Web Pages
- Creating Custom Phone Rings
- Viewing Security, Device, Model, and Status Information on the Phone
- Monitoring the Cisco Unified Wireless IP Phone Remotely
- Troubleshooting the Cisco Unified Wireless IP Phone 7921G
- Resolving Startup and Connectivity Problems
- Resolving Voice Quality and Roaming Problems
- General Troubleshooting Information
- Erasing the Local Configuration
- Providing Information to Users By Using a Website
- Supporting International Users
- Physical and Operating Environment Specifications
- Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
- Index
5-9
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
Chapter 5 Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
Configuring Network Profile Settings
Step 4 Select Network Configuration.
Step 5 Scroll to DHCP Enabled and press No.
Step 6 Scroll to IP Address and press Select.
Step 7 In the New IP Address: field, enter the static IP address for the phone.
Step 8 Press Options > Validate to save the entry or press Cancel.
You must enter the other required static fields. See Table 5-2 for descriptions of
these fields.
For information about entering values, see the “Guidelines for Editing Settings in
the Network Profile” section on page 5-5.
Ta b l e 5-2 Static Settings When DHCP is Disabled
Static Setting Description
IP Address IP address, the unique identifier assigned by the
system administrator for the phone.
Subnet Mask Used to partition the IP address into a network
identifier and host identifier so TCP/IP can
distinguish between them.
Default Router 1 Identifies the gateway that provides connectivity to
the IP network beyond the subnet to which the phone
belongs.
Domain Name Identifies the Domain Name System (DNS) domain in
which the phone resides.
DNS Server 1
DNS Server 2
If the system is configured to use host names for
servers instead of IP addresses, identify the primary
and secondary DNS server to resolve host names.
Alternate TFTP server Identifies whether you are using an alternate TFTP
server. See
Configuring an Alternate TFTP Server,
page 5-10.
TFTP Server 1 Identifies the TFTP server that the phone uses to
obtain configuration files.