Specifications
Table Of Contents
- Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0 and Later
- Contents
- Preface
- An Overview of the Cisco Unified Wireless IP Phone 7921G
- An Overview of the Voice Over IP Wireless Network
- Understanding the Wireless LAN
- Components of the VoIP Wireless Network
- Voice Over IP Wireless Network Configuration
- Site Survey Verification
- Setting Up the Cisco Unified Wireless IP Phone 7921G
- Before You Begin
- Installing the Cisco Unified Wireless IP Phone 7921G
- Powering On the Cisco Unified Wireless IP Phone 7921G
- Understanding the Phone Startup Process
- Using the Cisco Unified Wireless IP Phone 7921G Web Pages
- Using the USB Connection for Initial Phone Configuration
- Updating Phones Remotely
- Configuring Network Profiles
- Configuring USB Settings
- Configuring Trace Settings
- Using System Settings
- Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
- Accessing Network and Phone Settings
- Configuring Network Profile Settings
- Changing Phone Settings
- Configuring the Security Certificate on the Phone
- Changing the USB Configuration
- Configuring Features, Templates, Services, and Users
- Configuring Cisco Unified Wireless IP Phones in Cisco Unified CallManager
- Telephony Features Available for the Phone
- Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G
- Configuring Softkey Templates
- Modifying Phone Button Templates
- Setting Up Services
- Configuring Corporate and Personal Directories
- Adding Users to Cisco Unified CallManager
- Managing the User Options Web Pages
- Creating Custom Phone Rings
- Viewing Security, Device, Model, and Status Information on the Phone
- Monitoring the Cisco Unified Wireless IP Phone Remotely
- Troubleshooting the Cisco Unified Wireless IP Phone 7921G
- Resolving Startup and Connectivity Problems
- Resolving Voice Quality and Roaming Problems
- General Troubleshooting Information
- Erasing the Local Configuration
- Providing Information to Users By Using a Website
- Supporting International Users
- Physical and Operating Environment Specifications
- Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
- Index
Chapter 4 Using the Cisco Unified Wireless IP Phone 7921G Web Pages
Using System Settings
4-32
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
Procedure
Step 1 Connect the USB cable to the phone and access the phone’s web page using the
instructions on
“Accessing the Phone Web Page” section on page 4-5.
Step 2 On the phone’s web page, choose the Network Profiles hyperlink and configure
the Network Profile settings for your template configuration.
Note You can leave the Username and Password fields blank so they can be
configured individually.
Step 3 Next, configure the USB Settings and Trace Settings for your template
configuration.
Step 4 Choose the Backup Settings hyperlink, to access the export and import settings.
Step 5 In the Export Configuration area, enter an encryption key of from 8 to 20
characters.
Record this key because you must enter this key to import the configuration
template on other phones.
Step 6 Click Export and the File Download dialog displays, and then click Save.
Step 7 Give your configuration a new file name such as 7921template.cfg.
Step 8 Choose a location on your PC or on the network for the file and then click Save.
Step 9 The encrypted configuration file contains these settings:
• Profile Name
• SSID
• Single Access Point
• Call Power Save Mode
• 802.11 Mode
• WLAN Security
• Authentication Method
• User name
• Password
• Passphrase