Specifications
Table Of Contents
- Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0 and Later
- Contents
- Preface
- An Overview of the Cisco Unified Wireless IP Phone 7921G
- An Overview of the Voice Over IP Wireless Network
- Understanding the Wireless LAN
- Components of the VoIP Wireless Network
- Voice Over IP Wireless Network Configuration
- Site Survey Verification
- Setting Up the Cisco Unified Wireless IP Phone 7921G
- Before You Begin
- Installing the Cisco Unified Wireless IP Phone 7921G
- Powering On the Cisco Unified Wireless IP Phone 7921G
- Understanding the Phone Startup Process
- Using the Cisco Unified Wireless IP Phone 7921G Web Pages
- Using the USB Connection for Initial Phone Configuration
- Updating Phones Remotely
- Configuring Network Profiles
- Configuring USB Settings
- Configuring Trace Settings
- Using System Settings
- Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
- Accessing Network and Phone Settings
- Configuring Network Profile Settings
- Changing Phone Settings
- Configuring the Security Certificate on the Phone
- Changing the USB Configuration
- Configuring Features, Templates, Services, and Users
- Configuring Cisco Unified Wireless IP Phones in Cisco Unified CallManager
- Telephony Features Available for the Phone
- Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G
- Configuring Softkey Templates
- Modifying Phone Button Templates
- Setting Up Services
- Configuring Corporate and Personal Directories
- Adding Users to Cisco Unified CallManager
- Managing the User Options Web Pages
- Creating Custom Phone Rings
- Viewing Security, Device, Model, and Status Information on the Phone
- Monitoring the Cisco Unified Wireless IP Phone Remotely
- Troubleshooting the Cisco Unified Wireless IP Phone 7921G
- Resolving Startup and Connectivity Problems
- Resolving Voice Quality and Roaming Problems
- General Troubleshooting Information
- Erasing the Local Configuration
- Providing Information to Users By Using a Website
- Supporting International Users
- Physical and Operating Environment Specifications
- Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
- Index
Chapter 4 Using the Cisco Unified Wireless IP Phone 7921G Web Pages
Using System Settings
4-30
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
Viewing Trace Logs
You can use the Trace Logs area on the web page to view and manage trace files.
System trace logs appear in a list on this page. You define how many messages are
saved in the Trace Settings area. To view a trace log, click on the “Message.<n>”.
The trace log appears in ASCII text. You can save the text file in a directory or on
a disk to send to TAC for troubleshooting purposes.
Note Trace logs are erased when the phone is powered off. To preserve trace logs, see
the “Configuring Trace Settings” section on page 4-27.
To display the Trace Logs area, access the web page for the phone as described in
the
“Setting Up Your PC to Configure the Cisco Unified Wireless
IP Phone 7921G” section on page 4-2, and then click the Trace Logs hyperlink.
Related Topics
• Using System Settings, page 4-29
• Backup Settings for Phone Configuration, page 4-30
• Upgrading Phone Firmware, page 4-34
• Changing the Admin Password, page 4-35
Backup Settings for Phone Configuration
You can use the Backup Settings area on the web page to export the phone
configuration. You must set up an encryption key that encrypts the phone settings
to keep them secure. When you export a configuration, all the settings in the
network profiles, phone settings, USB settings, and trace are copied. None of the
statistics or information fields are copied from the web pages.
Note To import a file to a phone, you must enter the same encryption key that was used
to export the file.