Specifications
Table Of Contents
- Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0 and Later
- Contents
- Preface
- An Overview of the Cisco Unified Wireless IP Phone 7921G
- An Overview of the Voice Over IP Wireless Network
- Understanding the Wireless LAN
- Components of the VoIP Wireless Network
- Voice Over IP Wireless Network Configuration
- Site Survey Verification
- Setting Up the Cisco Unified Wireless IP Phone 7921G
- Before You Begin
- Installing the Cisco Unified Wireless IP Phone 7921G
- Powering On the Cisco Unified Wireless IP Phone 7921G
- Understanding the Phone Startup Process
- Using the Cisco Unified Wireless IP Phone 7921G Web Pages
- Using the USB Connection for Initial Phone Configuration
- Updating Phones Remotely
- Configuring Network Profiles
- Configuring USB Settings
- Configuring Trace Settings
- Using System Settings
- Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
- Accessing Network and Phone Settings
- Configuring Network Profile Settings
- Changing Phone Settings
- Configuring the Security Certificate on the Phone
- Changing the USB Configuration
- Configuring Features, Templates, Services, and Users
- Configuring Cisco Unified Wireless IP Phones in Cisco Unified CallManager
- Telephony Features Available for the Phone
- Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G
- Configuring Softkey Templates
- Modifying Phone Button Templates
- Setting Up Services
- Configuring Corporate and Personal Directories
- Adding Users to Cisco Unified CallManager
- Managing the User Options Web Pages
- Creating Custom Phone Rings
- Viewing Security, Device, Model, and Status Information on the Phone
- Monitoring the Cisco Unified Wireless IP Phone Remotely
- Troubleshooting the Cisco Unified Wireless IP Phone 7921G
- Resolving Startup and Connectivity Problems
- Resolving Voice Quality and Roaming Problems
- General Troubleshooting Information
- Erasing the Local Configuration
- Providing Information to Users By Using a Website
- Supporting International Users
- Physical and Operating Environment Specifications
- Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
- Index
4-19
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
Chapter 4 Using the Cisco Unified Wireless IP Phone 7921G Web Pages
Configuring Network Profiles
Procedure
Step 1 Choose the network profile that uses LEAP, EAP-FAST, or Auto (AKM).
Step 2 In the Username field, enter the network username for this profile.
Step 3 In the Password field, enter the network password string for this profile.
Step 4 Click Save to make the change.
Configuring the Pre-shared Key
When using Auto (AKM) with WPA Pre-shared key or WPA2 with Pre-shared key
for authentication, you must configure a Passphrase/Pre-shared key in the
Wireless Security Credentials area.
Pre-shared Key Formats
The Cisco Unified Wireless IP Phone 7921G supports ASCII and hexadecimal
formats. You must use one of these formats when setting up a WPA Pre-shared
key:
Hexadecimal
For hexadecimal keys, you must enter 64 hex digits (0-9 and/or A-F); for example,
AB123456789CD01234567890EFAB123456789CD01234567890EF3456789C
ASCII
For ASCII keys, you must enter a character string that uses 0-9, A-Z (upper and
lower case), including symbols and is from 8 to 63 characters in length; for
example, GREG12356789ZXYW
To setup a Pre-shared key in the Wireless Credentials area, follow these steps:
Procedure
Step 1 Choose the network profile that uses Auto (AKM) to enable the WPA Pre-shared
key or WPA2 Pre-shared key.