Specifications
Table Of Contents
- Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0 and Later
- Contents
- Preface
- An Overview of the Cisco Unified Wireless IP Phone 7921G
- An Overview of the Voice Over IP Wireless Network
- Understanding the Wireless LAN
- Components of the VoIP Wireless Network
- Voice Over IP Wireless Network Configuration
- Site Survey Verification
- Setting Up the Cisco Unified Wireless IP Phone 7921G
- Before You Begin
- Installing the Cisco Unified Wireless IP Phone 7921G
- Powering On the Cisco Unified Wireless IP Phone 7921G
- Understanding the Phone Startup Process
- Using the Cisco Unified Wireless IP Phone 7921G Web Pages
- Using the USB Connection for Initial Phone Configuration
- Updating Phones Remotely
- Configuring Network Profiles
- Configuring USB Settings
- Configuring Trace Settings
- Using System Settings
- Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
- Accessing Network and Phone Settings
- Configuring Network Profile Settings
- Changing Phone Settings
- Configuring the Security Certificate on the Phone
- Changing the USB Configuration
- Configuring Features, Templates, Services, and Users
- Configuring Cisco Unified Wireless IP Phones in Cisco Unified CallManager
- Telephony Features Available for the Phone
- Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G
- Configuring Softkey Templates
- Modifying Phone Button Templates
- Setting Up Services
- Configuring Corporate and Personal Directories
- Adding Users to Cisco Unified CallManager
- Managing the User Options Web Pages
- Creating Custom Phone Rings
- Viewing Security, Device, Model, and Status Information on the Phone
- Monitoring the Cisco Unified Wireless IP Phone Remotely
- Troubleshooting the Cisco Unified Wireless IP Phone 7921G
- Resolving Startup and Connectivity Problems
- Resolving Voice Quality and Roaming Problems
- General Troubleshooting Information
- Erasing the Local Configuration
- Providing Information to Users By Using a Website
- Supporting International Users
- Physical and Operating Environment Specifications
- Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
- Index
Chapter 4 Using the Cisco Unified Wireless IP Phone 7921G Web Pages
Configuring Network Profiles
4-10
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
• Configuring Trace Settings, page 4-27
• Using System Settings, page 4-29
Configuring Network Profiles
You can configure up to four different profiles for a phone to take advantage of
different WLAN environments. You can add names to the profiles and enable one
or more of the profiles for the phone to use. The Network Profiles area displays
this information about each profile:
• Enabled Profile—A check mark designates an enabled profile
• Name—Lists the name for the profile
• SSID—Lists the SSID used by this profile
• Status—Identifies which profile the phone is using
To display the Network Profiles list, access the web page for the phone as
described in the
“Accessing the Phone Web Page” section on page 4-5, and then
click the Network Profiles hyperlink.
For more information about configuring network profiles, see these sections:
• Network Profile Settings, page 4-10
• Configuring Wireless Settings in a Network Profile, page 4-15
• Setting the Wireless LAN Security Mode, page 4-16
• Setting the Wireless Security Credentials, page 4-18
• Setting Wireless Encryption, page 4-20
• Configuring IP Network Settings, page 4-21
• Configuring the Alternate TFTP Server, page 4-23
• Configuring Advanced Settings, page 4-24
Network Profile Settings
You can configure the settings for a profile by using this web page area. You can
also modify or view configured profiles from this web page area.
Table 4-2
describes these items and provides references for more information.