Specifications
Table Of Contents
- Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0 and Later
- Contents
- Preface
- An Overview of the Cisco Unified Wireless IP Phone 7921G
- An Overview of the Voice Over IP Wireless Network
- Understanding the Wireless LAN
- Components of the VoIP Wireless Network
- Voice Over IP Wireless Network Configuration
- Site Survey Verification
- Setting Up the Cisco Unified Wireless IP Phone 7921G
- Before You Begin
- Installing the Cisco Unified Wireless IP Phone 7921G
- Powering On the Cisco Unified Wireless IP Phone 7921G
- Understanding the Phone Startup Process
- Using the Cisco Unified Wireless IP Phone 7921G Web Pages
- Using the USB Connection for Initial Phone Configuration
- Updating Phones Remotely
- Configuring Network Profiles
- Configuring USB Settings
- Configuring Trace Settings
- Using System Settings
- Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
- Accessing Network and Phone Settings
- Configuring Network Profile Settings
- Changing Phone Settings
- Configuring the Security Certificate on the Phone
- Changing the USB Configuration
- Configuring Features, Templates, Services, and Users
- Configuring Cisco Unified Wireless IP Phones in Cisco Unified CallManager
- Telephony Features Available for the Phone
- Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G
- Configuring Softkey Templates
- Modifying Phone Button Templates
- Setting Up Services
- Configuring Corporate and Personal Directories
- Adding Users to Cisco Unified CallManager
- Managing the User Options Web Pages
- Creating Custom Phone Rings
- Viewing Security, Device, Model, and Status Information on the Phone
- Monitoring the Cisco Unified Wireless IP Phone Remotely
- Troubleshooting the Cisco Unified Wireless IP Phone 7921G
- Resolving Startup and Connectivity Problems
- Resolving Voice Quality and Roaming Problems
- General Troubleshooting Information
- Erasing the Local Configuration
- Providing Information to Users By Using a Website
- Supporting International Users
- Physical and Operating Environment Specifications
- Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
- Index
Chapter 4 Using the Cisco Unified Wireless IP Phone 7921G Web Pages
Updating Phones Remotely
4-8
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
• On the Cisco Unified Wireless IP Phone 7921G, press Settings > Device
Information > Network Configuration and then scroll to the IP Address
option.
Step 2 Open a web browser and enter the following URL, where IP_address is the
IP
address of the Cisco Unified IP Phone:
https://<IP_address>
Note When the Security Alert dialog box displays a notice to accept the Trust
Certificate, click Ye s or Always to accept the application.
Step 3 Log in to the web pages with username: admin and enter the password: Cisco for
the phone web pages.
The Summary web page for the phone displays. See Table 4-1 for details about
this web page.
Step 4 Make changes to configurable pages as needed. For information, see these
sections:
• Configuring Network Profiles, page 4-10
• Configuring USB Settings, page 4-25
• Configuring Trace Settings, page 4-27
• Using System Settings, page 4-29
Step 5 Return to the Phone Configuration web page in Cisco Unified CallManager
Administration and set the Web Access field back to ReadOnly or Disabled.
Step 6 Reset the phone from Cisco Unified CallManager to disable full access to the web
pages.
Be sure to change the Web Access privileges and reset the phone to prevent users
from making configuration changes on the phone web pages.
Note If a wireless IP phone was previously registered to Cisco Unified CallManager
Release 4.x, and then registers to Cisco Unified CallManager 5.x, the Phone
Configuration web page password might be reset to “Cisco.”