Specifications
Table Of Contents
- Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0 and Later
- Contents
- Preface
- An Overview of the Cisco Unified Wireless IP Phone 7921G
- An Overview of the Voice Over IP Wireless Network
- Understanding the Wireless LAN
- Components of the VoIP Wireless Network
- Voice Over IP Wireless Network Configuration
- Site Survey Verification
- Setting Up the Cisco Unified Wireless IP Phone 7921G
- Before You Begin
- Installing the Cisco Unified Wireless IP Phone 7921G
- Powering On the Cisco Unified Wireless IP Phone 7921G
- Understanding the Phone Startup Process
- Using the Cisco Unified Wireless IP Phone 7921G Web Pages
- Using the USB Connection for Initial Phone Configuration
- Updating Phones Remotely
- Configuring Network Profiles
- Configuring USB Settings
- Configuring Trace Settings
- Using System Settings
- Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
- Accessing Network and Phone Settings
- Configuring Network Profile Settings
- Changing Phone Settings
- Configuring the Security Certificate on the Phone
- Changing the USB Configuration
- Configuring Features, Templates, Services, and Users
- Configuring Cisco Unified Wireless IP Phones in Cisco Unified CallManager
- Telephony Features Available for the Phone
- Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G
- Configuring Softkey Templates
- Modifying Phone Button Templates
- Setting Up Services
- Configuring Corporate and Personal Directories
- Adding Users to Cisco Unified CallManager
- Managing the User Options Web Pages
- Creating Custom Phone Rings
- Viewing Security, Device, Model, and Status Information on the Phone
- Monitoring the Cisco Unified Wireless IP Phone Remotely
- Troubleshooting the Cisco Unified Wireless IP Phone 7921G
- Resolving Startup and Connectivity Problems
- Resolving Voice Quality and Roaming Problems
- General Troubleshooting Information
- Erasing the Local Configuration
- Providing Information to Users By Using a Website
- Supporting International Users
- Physical and Operating Environment Specifications
- Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
- Index
4-5
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
Chapter 4 Using the Cisco Unified Wireless IP Phone 7921G Web Pages
Using the USB Connection for Initial Phone Configuration
• Setting Configuration Privileges for the Phone Web Page, page 4-7
• Accessing the Configuration Web Page for a Phone, page 4-7
Accessing the Phone Web Page
After setting up the USB interface on the PC, you are ready to use the USB cable
connection to the phone.
To access the phone web page, follow these steps:
Procedure
Step 1 Open a Windows browser.
Step 2 In the address field, enter https://192.168.1.100 to locate the wireless IP phone
web page.
Note When the Security Alert dialog box displays a notice to accept the Trust
Certificate, click Ye s or Always to accept the application.
The Summary web page for the phone displays. See Table 4-1 for details about
this web page.
Step 3 Use the hyperlinks in the left column of the web page to configure settings for the
phones. For information, see these sections:
• Configuring Network Profiles, page 4-10
• Configuring IP Network Settings, page 4-21
• Configuring USB Settings, page 4-25
• Viewing Trace Logs, page 4-30
• Using System Settings, page 4-29
Step 4 After entering the new settings, disconnect the USB cable from the phone. The
settings are active immediately.
Step 5 Check that the phone can access the network successfully.