Specifications
Table Of Contents
- Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0 and Later
- Contents
- Preface
- An Overview of the Cisco Unified Wireless IP Phone 7921G
- An Overview of the Voice Over IP Wireless Network
- Understanding the Wireless LAN
- Components of the VoIP Wireless Network
- Voice Over IP Wireless Network Configuration
- Site Survey Verification
- Setting Up the Cisco Unified Wireless IP Phone 7921G
- Before You Begin
- Installing the Cisco Unified Wireless IP Phone 7921G
- Powering On the Cisco Unified Wireless IP Phone 7921G
- Understanding the Phone Startup Process
- Using the Cisco Unified Wireless IP Phone 7921G Web Pages
- Using the USB Connection for Initial Phone Configuration
- Updating Phones Remotely
- Configuring Network Profiles
- Configuring USB Settings
- Configuring Trace Settings
- Using System Settings
- Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
- Accessing Network and Phone Settings
- Configuring Network Profile Settings
- Changing Phone Settings
- Configuring the Security Certificate on the Phone
- Changing the USB Configuration
- Configuring Features, Templates, Services, and Users
- Configuring Cisco Unified Wireless IP Phones in Cisco Unified CallManager
- Telephony Features Available for the Phone
- Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G
- Configuring Softkey Templates
- Modifying Phone Button Templates
- Setting Up Services
- Configuring Corporate and Personal Directories
- Adding Users to Cisco Unified CallManager
- Managing the User Options Web Pages
- Creating Custom Phone Rings
- Viewing Security, Device, Model, and Status Information on the Phone
- Monitoring the Cisco Unified Wireless IP Phone Remotely
- Troubleshooting the Cisco Unified Wireless IP Phone 7921G
- Resolving Startup and Connectivity Problems
- Resolving Voice Quality and Roaming Problems
- General Troubleshooting Information
- Erasing the Local Configuration
- Providing Information to Users By Using a Website
- Supporting International Users
- Physical and Operating Environment Specifications
- Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
- Index
Chapter 4 Using the Cisco Unified Wireless IP Phone 7921G Web Pages
Using the USB Connection for Initial Phone Configuration
4-4
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
The phone briefly displays “USB Connected” on the status line.
Configuring the USB LAN on the PC
To configure the USB LAN connection on your PC, follow these steps:
Procedure
Step 1 To setup the USB LAN connection, do one of the following:
• For Windows XP—Click Start > Control Panel > Network Connections.
• For Windows 2000—Click Start > Settings > Control Panel > Network and
Dial Up Connections.
Step 2 Locate and double-click the new LAN connection to open the Local Area
Connection Status window, then click Properties.
Step 3 Scroll to the Internet Protocol (TCP/IP) component and click Properties.
Step 4 In the Internet Protocol (TCP/IP) Properties window, choose Use the following
IP address:
Step 5 In the IP address field, enter a static IP address for the PC: 192.168.1. (1-254
-except 100), for example: 192.168.1.11
Note • By default, the Cisco Unified Wireless IP Phone 7921G is configured with
192.168.1.100 so you cannot use this IP address for the PC.
• Make sure to use an IP address that is not in use on any other interface on the
PC.
Step 6 Enter the subnet mask: 255.255.255.0
Step 7 Click OK to make the changes.
Related Topics
• Accessing the Phone Web Page, page 4-5