Specifications
Table Of Contents
- Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0 and Later
- Contents
- Preface
- An Overview of the Cisco Unified Wireless IP Phone 7921G
- An Overview of the Voice Over IP Wireless Network
- Understanding the Wireless LAN
- Components of the VoIP Wireless Network
- Voice Over IP Wireless Network Configuration
- Site Survey Verification
- Setting Up the Cisco Unified Wireless IP Phone 7921G
- Before You Begin
- Installing the Cisco Unified Wireless IP Phone 7921G
- Powering On the Cisco Unified Wireless IP Phone 7921G
- Understanding the Phone Startup Process
- Using the Cisco Unified Wireless IP Phone 7921G Web Pages
- Using the USB Connection for Initial Phone Configuration
- Updating Phones Remotely
- Configuring Network Profiles
- Configuring USB Settings
- Configuring Trace Settings
- Using System Settings
- Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
- Accessing Network and Phone Settings
- Configuring Network Profile Settings
- Changing Phone Settings
- Configuring the Security Certificate on the Phone
- Changing the USB Configuration
- Configuring Features, Templates, Services, and Users
- Configuring Cisco Unified Wireless IP Phones in Cisco Unified CallManager
- Telephony Features Available for the Phone
- Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G
- Configuring Softkey Templates
- Modifying Phone Button Templates
- Setting Up Services
- Configuring Corporate and Personal Directories
- Adding Users to Cisco Unified CallManager
- Managing the User Options Web Pages
- Creating Custom Phone Rings
- Viewing Security, Device, Model, and Status Information on the Phone
- Monitoring the Cisco Unified Wireless IP Phone Remotely
- Troubleshooting the Cisco Unified Wireless IP Phone 7921G
- Resolving Startup and Connectivity Problems
- Resolving Voice Quality and Roaming Problems
- General Troubleshooting Information
- Erasing the Local Configuration
- Providing Information to Users By Using a Website
- Supporting International Users
- Physical and Operating Environment Specifications
- Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
- Index
Chapter 4 Using the Cisco Unified Wireless IP Phone 7921G Web Pages
Using the USB Connection for Initial Phone Configuration
4-2
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
Using the USB Connection for Initial Phone
Configuration
To setup new phones for deployment to users, use your PC to enter the initial
configuration for the wireless network settings and network profiles. To save time
during initial deployment, you can create a standard network profile template and
export it to several phones. For more information, see the
“Backup Settings for
Phone Configuration” section on page 4-30.
See these sections for information about initial phone configuration:
• Setting Up Your PC to Configure the Cisco Unified Wireless
IP Phone 7921G, page 4-2
• Accessing the Phone Web Page, page 4-5
• Setting Configuration Privileges for the Phone Web Page, page 4-7
• Accessing the Configuration Web Page for a Phone, page 4-7
Setting Up Your PC to Configure the Cisco Unified Wireless
IP
Phone 7921G
Before you can configure phones using the USB connection, you must install
drivers and set up the USB ports on the phone and PC.
To interface with the phone and web pages using the USB cable, the PC must run
one of these operating systems:
• Windows 2000 Professional
• Windows XP
These sections provide information about setting up your PC:
• Installing the USB Drivers, page 4-3
• Configuring the USB LAN on the PC, page 4-4
• Using the USB Cable to Configure Phones, page 4-6