Specifications
Table Of Contents
- Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0 and Later
- Contents
- Preface
- An Overview of the Cisco Unified Wireless IP Phone 7921G
- An Overview of the Voice Over IP Wireless Network
- Understanding the Wireless LAN
- Components of the VoIP Wireless Network
- Voice Over IP Wireless Network Configuration
- Site Survey Verification
- Setting Up the Cisco Unified Wireless IP Phone 7921G
- Before You Begin
- Installing the Cisco Unified Wireless IP Phone 7921G
- Powering On the Cisco Unified Wireless IP Phone 7921G
- Understanding the Phone Startup Process
- Using the Cisco Unified Wireless IP Phone 7921G Web Pages
- Using the USB Connection for Initial Phone Configuration
- Updating Phones Remotely
- Configuring Network Profiles
- Configuring USB Settings
- Configuring Trace Settings
- Using System Settings
- Configuring Settings on the Cisco Unified Wireless IP Phone 7921G
- Accessing Network and Phone Settings
- Configuring Network Profile Settings
- Changing Phone Settings
- Configuring the Security Certificate on the Phone
- Changing the USB Configuration
- Configuring Features, Templates, Services, and Users
- Configuring Cisco Unified Wireless IP Phones in Cisco Unified CallManager
- Telephony Features Available for the Phone
- Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G
- Configuring Softkey Templates
- Modifying Phone Button Templates
- Setting Up Services
- Configuring Corporate and Personal Directories
- Adding Users to Cisco Unified CallManager
- Managing the User Options Web Pages
- Creating Custom Phone Rings
- Viewing Security, Device, Model, and Status Information on the Phone
- Monitoring the Cisco Unified Wireless IP Phone Remotely
- Troubleshooting the Cisco Unified Wireless IP Phone 7921G
- Resolving Startup and Connectivity Problems
- Resolving Voice Quality and Roaming Problems
- General Troubleshooting Information
- Erasing the Local Configuration
- Providing Information to Users By Using a Website
- Supporting International Users
- Physical and Operating Environment Specifications
- Checklist for Deploying the Cisco Unified Wireless IP Phone 7921G
- Index
Chapter 3 Setting Up the Cisco Unified Wireless IP Phone 7921G
Installing the Cisco Unified Wireless IP Phone 7921G
3-14
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-02
Charging the Phone Using the Power Supply
After assembling the power supply, you are ready to charge your Cisco Unified
Wireless IP
Phone 7921G. You can use the phone while the battery is being
charged. For charging times, see
Table 3-5.
To charge the Lithium ion battery using the power supply, follow these steps:
Procedure
Step 1 Connect the cable from the power supply to the outlet in the phone as shown in
Figure 3-3.
Step 2 Connect the power supply to an AC outlet.
Step 3 Monitor the indicator light. While the battery is charging the light is red, and turns
green when the battery is fully charged.
Step 4 When the battery is charged, you can disconnect the power supply from the phone,
and unplug the power cord from the AC outlet.