Specifications

Cisco Unified Wireless IP Phone 7921G Series Deployment Guide 91
This utility does not support certificate provisioning, which would be required in order to support server validation for PEAP or
EAP-TLS.
The utility does allow PEAP to be configured, but without the server validation option.
The Bulk Deployment Utility supports up to 1000 entries per CSV for export. If more than 1000 phones are being deployed,
then multiple CSV files will need to be created and imported.
If doing a bulk export, the username and password is applied to network profile 1 only.
Before exporting the TFTP downloadable configuration files, a template must be created containing the Network Profile, USB,
Trace and Wavelink settings.
Configure the Profile Name as necessary.
Configure the network profile WLAN settings (SSID, 802.11 mode, Security Mode, WLAN credentials) to match the voice
WLAN.
If planning to use unique 802.1x accounts with the Bulk Export method, the username and password do not need to be
configured, as that will be specified in the CSV file.
By default, DHCP is enabled and is the recommended method, otherwise, would need a template per phone if planning to use
static IP addressing.
An alternate TFTP server can be set if the Cisco Communications Manager’s TFTP server IP is not set in option 150 for the
DHCP scope.