Specifications

Cisco Unified Wireless IP Phone 7921G Series Deployment Guide 90
Ensure that Wavelink server enable is set to “Yes”.
Configure whether the client will get the Wavelink IP info from DHCP or configured statically.
Optionally set additional client parameters as necessary.
When the template has been completely configured, then select “Export to Wavelink” under the File menu.
A confirmation will then be displayed after the template has been exported successfully.
After the template has become available, will then need to push the package to the necessary clients.
This can be done on a device group or client level.
To update a single client, right click on it and select “Update Now”.
Can also optionally set “Force package sync during Update Now” in the client properties.
Using the Bulk Deployment Utility
The Bulk Deployment Utility for the Cisco Unified Wireless IP Phone 7921G is intended to help quicken the provisioning and
deployment process of many phones when unique 802.1x accounts are used with EAP-FAST, PEAP (MS-CHAPv2) or LEAP
or if a common set of credentials are used by all phones (i.e. WPA2-PSK or a common 802.1x account).
The utility allows the creation configuration files, which can be exported then enabled for TFTP download by the Cisco Unified
Wireless IP Phone 7921G.