Specifications

Cisco Unified Wireless IP Phone 7921G Series Deployment Guide 49
cnf-file perphone
create cnf-files
For more information on these features, see the Cisco Unified Wireless IP Phone 7921G Administration Guide or the Cisco
Unified Wireless IP Phone 7921G Release Notes.
http://www.cisco.com/en/US/products/hw/phones/ps379/prod_maintenance_guides_list.html
http://www.cisco.com/en/US/products/hw/phones/ps379/prod_release_notes_list.html
Configuring the Cisco Unified Wireless LAN Controller and Access
Points
When configuring the access points, use the following guidelines:
• Set “Quality of Service (QoS)” to “Platinum”.
• Ensure the “WMM Policy” is set to “Allowed” or “Required”
• Ensure “Aironet IE” is enabled
• Disable “P2P (Peer to Peer) Blocking Action” / “Public Secure Packet Forwarding (PSPF)”
• Disable “DHCP Address Assignment”
• Ensure “MFP Client Protection” is set to disabled or optional
• Ensure “Client Band Select” is not enabled
• Ensure “Admission Control Mandatory” is “Enabled” for Voice
• Ensure “Load-based CAC” is “Enabled” for Voice
• Ensure “Admission Control Mandatory” is “Disabled” for Video
• Ensure the “EDCA Profile” is set to “Voice Optimized”
• Ensure “Enable Low Latency MAC” is disabled
• Ensure “Aggressive Load Balancing” in the Controller configuration or “Client Load Balancing” in the WLAN
configuration are disabled
• Enable “Symmetric Mobile Tunneling Mode” if Layer 3 mobility is being used
• Ensure “ARPUnicast” is disabled, where proxy ARP will then be enabled
• Ensure that “DTPC” is “Enabled”
• Enable “Short Preamble” if using 2.4 GHz
Note: If clients from other regions are present and will attempt to associate with the wireless LAN, then ensure that World
Mode (802.11d) is enabled.
When using 802.1x authentication, it is recommended to implement CCKM to offer fast secure roaming.
SSID / WLAN Settings
The SSID to be used by voice clients can be configured to only apply to a certain 802.11 radio type.