Specifications

Cisco Unified Wireless IP Phone 7921G Series Deployment Guide 45
Locked Profiles
Individual profiles can also be locked, which does not allow the user to modify
those settings.
Load Server
A load server can be specified in IP format (x.x.x.x) if wanting to use an alternate
TFTP server for phone firmware downloads.
Admin Password
The admin password is used for web access. With Cisco Unified Communications
Manager 5.0 or later the admin password must be managed in Communications
Manager Administrator page, where previous versions allow local management.
Special Numbers
Special numbers can be programmed to dial out regardless of keypad lock state (i.e.
911).
Application URL
The application URL can be configured, which will convert the application button
to a service URL button or as a speed dial.
The application URL can be configured to link to a Push To Talk server for quick
access.
(I.e. PTT server =
http://x.x.x.x:8085/PushToTalk/displayPhoneGroupsMenu.do?sep=#DEVICENAM
E#)
To configure the application button as a speed dial, enter in the format as “Dial:X”
(i.e. Dial:23675).
“Send” Key Action
“Send” key action determines whether the green dial button is to use onhook
dialing and serve as last number redial, where a list of previously dialed numbers
will be listed, or to use offhook dialing, which will play dial tone.
Days Display Not Active
This field allows the user to specifiy the days that the backlight is to remain off by
default. To turn off the backlight for multiple days, hold down the control key
while selecting the days. Saturday and Sunday is the default setting.
Display On Time
This field indicates the time of day the display is to automatically turn itself on if it
is an active day. The value should be in a 24 hour format. The default setting is
07:30.
Display On Duration
This field indicates the amount of time the display is to be active for after the
display on time. The default setting is 10:30 (hours:minutes), so the display would
be turned off at 18:00 (6 pm).
Display Idle Timeout
This field indicates how long to wait before the display is turned off after the last
user activity. This timer gets reset after each interaction. The default setting is
01:00 (hours:minutes).
Phone Book Web Access
Phone book web access must be set to “Allow Admin” in order to access the phone
book via the web page.
Unlock-Settings Sequence
By default, **# must be entered to unlock a menu that contains configurable items,
which can optionally be disabled.
Application Button Activation
Timer
The activation timer and priority of the application button can also be specified.
This determines how long the button must be pressed and held to activate.