Specifications

Cisco Unified Wireless IP Phone 7921G Series Deployment Guide 39
To see all access points in the neighbor list menu, place a call from the Cisco Unified Wireless IP Phone 7921G to a wired IP
phone, where scanning occurs constantly while the phone call is active in auto scan mode.
Otherwise configure continuous scan mode.
The connected access point will be highlighted in red.
Access the neighbor list menu on the phone by pressing Settings > Status > Neighbor List
Cisco 7921G Site Survey
The Cisco Unified Wireless IP Phone 7921G has a Site Survey application as of release 1.1(1), which is an offline mode that
gathers information about the access points for the configured network profile and generates and HTML report after exiting the
application.
To access the Site Survey application, navigate to Settings > Status > Site Survey.
To view the HTML report, select System > Site Survey from the Cisco Unified Wireless IP Phone 7921G webpage.
This information can be utilized to confirm access point configuration as well as coverage.
The neighbor table shows which access points (along the column) are neighbors of the access points with the strongest signal
listed in the row. The percentage of time that the access point had the highest RSSI is displayed as well as the RSSI range for
that access point when it was observed. The access point name is hyperlinked to the access point detail listed below.