Specifications

Cisco Unified Wireless IP Phone 7921G Series Deployment Guide 109
3. Insert the USB cable into the phone after USB initialization is complete.
(Ensure that the USB driver has been installed prior and that an IP in the 192.168.1.0 /24 network has been configured
for that network connection)
4. When “Web Access Available...” is displayed, then navigate to http://192.168.1.100.
5. Browse to the TAR file, then click on “Upload”.
Restoring Factory Defaults
The configuration can be cleared by using the factory default menu option on the phone.
The factory default option erases all user-defined entries in Network Profiles, Phone Settings, and Call History.
To erase the local configuration, follow these steps:
1. Choose Settings > Phone Settings.
2. Press “**2” on the keypad.
The phone briefly displays “Restore to Default?”
3. Press the “Yes” softkey to confirm or “No” to cancel.
The phone resets after selecting “Yes”.
Capturing a Screenshot of the Phone Display
The current display can be captured by browsing to http://x.x.x.x/CGI/Screenshot, where x.x.x.x is the IP address of the Cisco
Unified Wireless IP Phone 7921G. At the prompt enter the username and password for the account for which the phone is
associated to.