Installation guide

Chapter 1 An Overview of the Cisco Unified Wireless IP Phone 7921G
Overview of Configuring and Installing the Cisco Unified Wireless IP Phone 7921G
1-18
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-01
Table 1-3 Checklist for Configuring the Cisco Unified Wireless IP Phone 7921G in Cisco
Unified CallManager
Task Purpose For More Information
1. Gather the following information
about the phone:
• MAC address
• Name or user ID of phone user
• Device pool
• Calling search space and
location information (if used)
• Security (authentication mode
and encryption)
• Number of lines, associated
directory numbers (DNs), and
partitions to assign to the phone
• User to associate with the phone
• Phone usage information
Provides list of configuration
requirements for setting up
phones.
Identifies preliminary
configuration that you need to
perform before configuring
individual phones, such as
button and softkey templates.
Applies to softkey template,
phone features, IP Phone
services, or phone
applications.
Refer to the Cisco Unified
CallManager System Guide,
Cisco Unified IP Phone
chapter.
See the “Telephony Features
Available for the Phone”
section on page 6-2.
2. Customize phone button templates
(if required).
Changes the number of lines,
speed-dial, Service URLs or
adds a Privacy feature to Line
View list to meet user needs.
Changes softkey positions in
Options menu
Refer to Cisco Unified
CallManager Administration
Guide,
“Phone Button Template
Configuration” chapter.
See the “Modifying Phone
Button Templates” section on
page 6-18.