Installation guide

1-17
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified CallManager Release 4.1, 4.2, 5.0
OL-10802-01
Chapter 1 An Overview of the Cisco Unified Wireless IP Phone 7921G
Overview of Configuring and Installing the Cisco Unified Wireless IP Phone 7921G
Configuring the Cisco Unified Wireless IP Phone 7921G in Cisco
Unified CallManager
To add phones to the Cisco Unified CallManager database, you can use:
• Auto-registration
• Cisco Unified CallManager Administration
• Bulk Administration Tool (BAT)
• BAT and the Tool for Auto-Registered Phones Support (TAPS)
For more information about these choices, see the “Methods for Adding Phones
to Cisco Unified CallManager” section on page 3-3.
For general information about configuring phones in Cisco Unified CallManager,
refer to the “Cisco Unified IP Phone” chapter in the Cisco Unified CallManager
System Guide.
Related Topic
Checklist for Configuring the Cisco Unified Wireless IP Phone 7921G in Cisco
Unified CallManager, page 1-17
Checklist for Configuring the Cisco Unified Wireless IP Phone 7921G in Cisco
Unified CallManager
Table 1-3 provides an overview and checklist of configuration tasks for the
Cisco Unified Wireless IP Phone 7921G in Cisco Unified CallManager
Administration. The list presents a suggested order to guide you through the
phone configuration process. Some tasks are optional, depending on your system
and user needs. For detailed procedures and information, refer to the sources in
the list.