Specifications

4-31
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 8.0
OL-21033-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
IPv6 Log Server Indicates the IP address and port of the remote logging machine to
which the phone sends log messages. These log messages help in
debugging the peer to peer image distribution feature.
Note The remote logging setting does not affect the sharing log
messages sent to the phone log.
This feature is disabled in this release.
From Cisco Unified
Communications Manager
Administration, choose
Device > Phone > Phone
Configuration.
CDP: PC Port
(applies to
7911G only)
Indicates whether CDP is enabled on the PC port (default is enabled).
Enable CDP on the PC port when Cisco VT Advantage/Unified Video
Advantage (CVTA) is connected to the PC port. CVTA does not work
without CDP interaction with the phone.
Note When CDP is disabled in Cisco Unified Communications
Manager, a warning is displayed, indicating that disabling
CDP on the PC port prevents CVTA from working.
Note The current PC and switch port CDP values are shown on the
Settings menu.
Use Cisco Unified
Communications Manager
Administration, and choose
Device > Phone.
LLDP: PC Port Enables and disables Link Layer Discovery Protocol (LLDP) on the
PC port. Use this setting to force the phone to use a specific discovery
protocol, which should match the protocol supported by the switch.
Settings include:
• Enabled—default
• Disabled
Use Cisco Unified
Communications Manager
Administration, and choose
Device > Phone > Phone
Configuration
LLDP-MED:
SW Port
Enables and disables Link Layer Discovery Protocol Media Endpoint
Discovery (LLDP-MED) on the switch port. Use this setting to force
the phone to use a specific discovery protocol, which should match the
protocol supported by the switch. Settings include:
• Enabled—default
• Disabled
Use Cisco Unified
Communications Manager
Administration, and choose
Device > Phone > Phone
Configuration
LLDP Power
Priority
Advertises the phone’s power priority to the switch, enabling the
switch to appropriately provide power to the phones. Settings include:
• Unknown—default
• Low
• High
• Critical
Use Cisco Unified
Communications Manager
Administration, and choose
Device > Phone > Phone
Configuration
LLDP Asset ID Identifies the asset ID assigned to the phone for inventory
management.
Use Cisco Unified
Communications Manager
Administration, and choose
Device > Phone > Phone
Configuration
Table 4-19 Network Configuration Menu Options (continued)
Option Description To Change