Specifications

4-28
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 8.0
OL-21033-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
QoS Configuration Menu
The QoS Configuration menu displays information that relates to quality of service (QoS) for the phone.
Table 4-18 describes the QoS Configuration menu options.
Related Topics
• Displaying a Configuration Menu, page 4-2
• Network Configuration Menu, page 4-5
Network Configuration
The Network Configuration menu displays device-specific network configuration settings on the phone.
Table 4-19 describes the options in this menu.
Vo i c e V L A N
Enabled (applies
to 7911G only)
Indicates whether the phone allows a device attached to the
access port to access the Voice VLAN. Setting this option to
No (disabled) prevents the attached PC from sending and
receiving data on the Voice VLAN. This setting also prevents
the PC from receiving data sent and received by the phone.
Set this setting to Yes (enabled) if an application that requires
monitoring of the phone’s traffic is running on the PC. These
applications include monitoring and recording applications
and network monitoring software.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Web Access
Enabled
Indicates whether web access is enabled (Yes) or disabled
(No) for the phone.
For more information, see Disabling and
Enabling Web Page Access, page 8-3.
Security Mode Displays the security mode that is set for the phone. Use Cisco Unified Communications
Manager Administration to modify.
Logging Display Used by Cisco Technical Assistance Center (TAC) for
troubleshooting.
The Cisco Unified IP Phone 7911G can be configured for
Enabled/Disabled/PC Controlled.
The Cisco Unified IP Phone 7906G supports only
Enabled/Disabled (no PC Controlled).
—
Table 4-17 Security Configuration Menu Options (continued)
Option Description To Change
Table 4-18 QoS Configuration Menu Options
Option Description To Change
DSCP For Call
Control
DSCP IP classification for call control
signaling.
From Cisco Unified Communications Manager Administration,
choose System > Enterprise Parameters.
DSCP For
Configuration
DSCP IP classification for any phone
configuration transfer.
From Cisco Unified Communications Manager Administration,
choose System > Enterprise Parameters.
DSCP For
Services
DSCP IP classification for phone-based
services.
From Cisco Unified Communications Manager Administration,
choose System > Enterprise Parameters.