Specifications

4-26
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 8.0
OL-21033-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
NTP Configuration Menu for SIP Phones
The NTP Configuration menu, which opens when you select NTP Configuration on the Locale
Configuration menu, displays information about the NTP server and mode configuration used by the
phone. Table 4-15 describes the options on this menu. For more information, see Locale Configuration
Menu, page 4-23.
Ethernet Configuration Menu
The Ethernet Configuration menu includes the options that are described in Table 4-16.
Enterprise
Advertise G.722
Codec
Enables/disables Cisco Unified IP Phones to advertise
the G.722 codec to Cisco Unified Communications
Manager.
For more information, see Cisco Unified
Communications Manager System Guide, Cisco
Unified IP Phones.
Note When a phone is registered with a Cisco Unified
Communications Manager that does not support
this setting, the default is “Disabled.”
From Cisco Unified Communications Manager
Administration, choose System > Enterprise
Parameters.
Device Advertise
G.722 Codec
Allows you to override the Enterprise Advertise G.722
Codec on a per-phone basis.
The default is “Use System Default,” which means the
value configured for the Enterprise Advertise G.722
Codec parameter gets used.
• From Cisco Unified Communications
Manager Administration, choose Device >
Phone.
Table 4-14 Media Configuration Menu Options (continued)
Option Description To Change
Table 4-15 NTP Configuration Menu Options
Option Description To Change
NTP IP
Address 1
The IP address of the primary NTP server. From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
NTP IP
Address 2
The IP address of the secondary or backup NTP server. From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
NTP Mode 1 The primary server mode. Supported modes are
Directed Broadcast and Unicast.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
NTP Mode 2 The secondary server mode. Supported modes are
Directed Broadcast and Unicast.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
DST Auto Adjust Indicates whether automatic adjustment for daylight
savings time is enabled on the phone.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.