Specifications

4-25
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 8.0
OL-21033-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Media Configuration Menu
The Media Configuration menu displays whether the speaker capability is enabled. Table 4-14 describes
the options on this menu.
Personalization Indicates whether the phone has been enabled for configuring
custom ring tones and wallpaper images.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Enbloc Dialing
(SCCP only)
Indicates whether the phone will use Enbloc dialing. If
“Enabled”, the phone will use Enbloc dialing when possible.
If “Disabled”, the phone will not use Enbloc dialing. You
should disable Enbloc dialing if either Forced Authorization
Codes (FAC) or Client Matter Codes (CMC) dialing is being
used.
Default: Enabled
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Table 4-13 UI Configuration Menu Options (continued)
Option Description To Change
Table 4-14 Media Configuration Menu Options
Option Description To Change
Speaker Enabled Indicates whether the speaker is enabled for monitoring
calls on the phone.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Wideband
Handset
Indicates whether wideband is enabled or disabled for
the handset.
Default: “Use Phone Default” on Cisco Unified
Communications Manager Administration. (This
default means that the phone will be enabled for a
wideband handset only if the phone was shipped with a
wideband handset.)
• If Wideband Handset UI Control is enabled,
you or the user can choose >
User Preferences >
Audio Preferences > Wideband Handset.
• If Wideband Handset UI Control is
disabled, from Cisco Unified
Communications Manager Administration,
choose Device > Phone > Phone
Configuration to set this value.
Note If you allowed this option to be user
controllable (in the Wideband Handset
UI Control option), the user-configured
value takes precedence.