Specifications

4-24
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 8.0
OL-21033-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Table 4-13 UI Configuration Menu Options
Option Description To Change
Group Listen,
Enabled/Disabled
Indicates whether the group listen feature is enabled or
disabled.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Reverting Focus
Priority
Indicates whether the phone shifts the call focus on the phone
screen to an incoming call or a reverting hold call. Settings
include:
Lower—Focus priority given to incoming calls.
Higher —Focus priority given to reverting calls.
Even —Focus priority given to the first call.
Use Cisco Unified Communications
Manager to modify options.
See also: Hold Reversion.
Auto Call Select Indicates whether the phone automatically shifts the call focus
to an incoming call on the same line when the user is already
on a call.
When this option is enabled, the phone shifts the call focus to
the most recent incoming call.
When this option is disabled, all automatic focus changes are
disabled regardless of their settings.
Default: Enabled.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
“more” Softkey
Timer
Indicates the number of seconds that additional softkeys are
displayed after the user presses more. If this timer expires
before the user presses another softkey, the display reverts to
the initial softkeys.
Range: 5 to 30; 0 represents an infinite timer.
Default: 5.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone Configuration.
Wideband
Handset UI
Control
Indicates whether the user can configure the Wideband
Handset option in the phone user interface.
Val u e s :
• Enabled—The user can configure the Wideband Handset
option in the Audio Preferences menu on the phone
(choose > User Preferences > Audio
Preferences> Wideband Handset).
• Disabled—The value of the Wideband Handset option in
Cisco Unified Communications Manager Administration
gets used (see Media Configuration Menu, page 4-25).
Default: Enabled
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.