Specifications

4-7
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 8.0
OL-21033-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
Domain Name Name of the Domain Name System (DNS) domain in which the phone
resides.
Note If the phone receives different domain names from the DHCPv4
and DHCPv6 servers, the domain name from the DHCPv6 takes
precedence.
1. Unlock network
configuration options.
2. Disable DHCP.
If the IP Addressing
mode is configured for
IPv4 only, set the DHCP
option to No.
If the IP Addressing
mode is configured for
IPv6 only, set the
DHCPv6 option to No.
If the IP Addressing
mode is configured for
both IPv4 and IPv6, set
both DHCP option and
DHCPv6 to No.
3. Scroll to the Domain
Name option, press the
Edit softkey, and then
enter a new domain
name.
4. Press the Validate
softkey and then press
the Save softkey.
Operational VLAN
ID
Auxiliary Virtual Local Area Network (VLAN) configured on a Cisco
Catalyst switch in which the phone is a member.
If the phone has not received an auxiliary VLAN, this option indicates
the Administrative VLAN.
If neither the auxiliary VLAN nor the Administrative VLAN are
configured, this option is blank.
The phone obtains its
Operational VLAN ID via
Cisco Discovery Protocol
(CDP) from the switch to
which the phone is attached.
To assign a VLAN ID
manually, use the Admin
VLAN ID option.
Admin. VLAN ID Auxiliary VLAN in which the phone is a member.
Used only if the phone does not receive an auxiliary VLAN from the
switch; otherwise it is ignored.
1. Unlock network
configuration options.
2. Scroll to the Admin.
VLAN ID option, press
the Edit softkey, and
then enter a new Admin
VLAN setting.
3. Press the Validate
softkey and then press
the Save softkey.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change