Specifications

4-2

Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 8.0

OL-21033-01

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Configuration Menus on the Cisco Unified IP Phones 7906G and 7911G

Related Topics

• Unlocking and Locking Options, page 4-3

• Editing the Values of an Option Setting, page 4-3

• Overview of Options Configurable from a Phone, page 4-4

• Network Configuration Menu, page 4-5

• Device Configuration Menu, page 4-17

Displaying a Configuration Menu

To display a configuration menu, perform the following steps.

Note You can control whether a phone has access to the Settings menu or to options on this menu by using the

Settings Access field in the Cisco Unified Communications Manager Administration Phone

Configuration window. The Settings Access field accepts these values:

• Enabled—Allows access to the Settings menu.

• Disabled—Prevents access to the Settings menu.

• Restricted—Allows access to the User Preferences menu and allows volume changes to be saved.

Prevents access to other options on the Settings menu.

If you cannot access an option on the Settings menu, check the Settings Access field.

Procedure

Step 1 Press the Applications Menu button.

Step 2 Choose Settings.

Step 3 Perform one of these actions to display the desired menu:

• Use the Navigation button to select the desired menu and then press the Select softkey.

• Use the keypad on the phone to enter the number that corresponds to the menu.

Step 4 To display a submenu, repeat Step 3.

Step 5 To exit a menu, press the Exit softkey.