Specifications

3-10

Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 8.0

OL-21033-01

Chapter 3 Setting Up the Cisco Unified IP Phone

Mounting the Phone to a Wall

Figure 3-4 Cisco Unified IP Phone Model 7911G Cable Connections

Related Topics

• Before You Begin, page 3-1

• Mounting the Phone to a Wall, page 3-10

• Configuring Startup Network Settings, page 3-11

Mounting the Phone to a Wall

You can mount the Cisco Unified IP Phone on a wall by using the back of the phone as a mounting

bracket or you can use special brackets available in a Cisco Unified IP Phone wall mount kit. (Wall

mount kits must be ordered separately from the phones.) If you attach the phone to a wall by using the

back of the phone and not the wall mount kit, you need to supply the following tools and parts:

• Screwdriver

• Screws to secure the Cisco Unified IP phone to the wall

Before You Begin

To ensure that the handset attaches securely to a wall-mounted phone, remove the handset wall hook

from the handset rest, rotate the hook 180 degrees, and reinsert the hook. Turning the hook exposes a lip

on which the handset catches when the phone is vertical. For an illustrated procedure, refer to the

Installing the Universal Wall Mount Kit for the Cisco Unified IP Phone document at:

http://www.cisco.com/en/US/products/hw/phones/ps379/prod_installation_guides_list.html

1 Network port (10/100 SW) 4 DC Adapter port (DC48V)

2 Access port (10/100 PC) 5 AC-to-DC power supply

3 Handset port 6 AC power cord

91638