Specifications

9-6
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 8.0
OL-21033-01
Chapter 9 Troubleshooting and Maintenance
Cisco Unified IP Phone Resets Unexpectedly
Registering the Phone with Cisco Unified Communications Manager
A Cisco Unified IP Phone can register with a Cisco Unified Communications Manager server only if the
phone has been added to the server or if auto-registration is enabled. Review the information and
procedures in the Adding Phones to the Cisco Unified Communications Manager Database, page 2-7 to
ensure that the phone has been added to the Cisco Unified Communications Manager database.
To verify that the phone is in the Cisco Unified Communications Manager database, choose Device >
Phone > Find from Cisco Unified Communications Manager Administration to search for the phone
based on its MAC Address. For information about determining a MAC address, see Determining the
MAC Address of a Cisco Unified IP Phone, page 2-11.
If the phone is already in the Cisco Unified Communications Manager database, its configuration file
may be damaged. See Creating a New Configuration File, page 9-5 for assistance.
Cisco Unified IP Phone Resets Unexpectedly
If users report that their phones are resetting during calls or while idle on their desk, you should
investigate the cause. If the network connection and Cisco Unified Communications Manager
connection are stable, a Cisco Unified IP Phone should not reset on its own.
Typically, a phone resets if it has problems connecting to the Ethernet network or to
Cisco Unified Communications Manager. These sections can help you identify the cause of a phone
resetting in your network:
• Verifying Physical Connection, page 9-6
• Identifying Intermittent Network Outages, page 9-6
• Verifying DHCP Settings, page 9-7
• Checking Static IP Address Settings, page 9-7
• Verifying Voice VLAN Configuration, page 9-7
• Verifying that the Phones Have Not Been Intentionally Reset, page 9-7
• Eliminating DNS or Other Connectivity Errors, page 9-8
• Checking Power Connection on SIP Phones, page 9-8
Verifying Physical Connection
Verify that the Ethernet connection to which the Cisco Unified IP Phone is connected is up. For example,
check whether the particular port or switch to which the phone is connected is down.
Identifying Intermittent Network Outages
Intermittent network outages affect data and voice traffic differently. Your network might have been
experiencing intermittent outages without detection. If so, data traffic can resend lost packets and verify
that packets are received and transmitted. However, voice traffic cannot recapture lost packets. Rather
than retransmitting a lost network connection, the phone resets and attempts to reconnect its network
connection.
If you are experiencing problems with the voice network, you should investigate whether an existing
problem is simply being exposed.